Transmission questions
Hello all. New member and new to classic cadillacs so I have some questions. Last year I got my hands on a resto-mod 63 coupe deville project and have been making good progress till now. I don't have any of the original throttle linkage/pedal assembly including the TV rod. Would not having the TV rod hooked up yet cause the transmission not to upshift?
Replies to This Discussion
-
Permalink Reply by Dennis P. DiBari on
-
Hi James,
Albeit I am not an expert on transmissions, that TV rod should be hooked up to the linkage, especially when higher throttle is used. Maybe Jason Edge would have the TV rod off of one of the parts cars? Pretty sure it is a must with the Hydra-matic transmission.
Dennis DiBari, Cottekill, NY
-
Permalink Reply by James Fraschieri on
-
Most of my experience is with small block chevys so I'm a bit out of my wheelhouse on this one but I'm enjoying learning new stuff. I have never been very good with transmissions in the first place so this hydra matic is completely unknown territory to me
-
Permalink Reply by Jason Edge on
-
I am not a Hydra-Matic expert but do know you need the TV Rod. I have them like new gold cadmium plated for $65 ($48.75 for Chapter Members) with the correct connectors at both ends to connect to transmission at bottom and carb throttle plate at top. You can see them by Clicking Here.
If interested in one of mine, or other parts, email me at jasonedge64@outlook.com
-
-
My problem is I have none of the original throttle assembly so I will have to fabricate something which won't be an issue. Is there anything vacuum controlled on the transmission?
-
-
There is no vacuum to the 1963/64 Hydramatic. The Turbo Hydramatic introduced in 1964 on certain body styles had a vacuum modulator but not the HydraMatic.
-
-
James,
There should be a vacuum modulator on the side of the transmission.
Dennis DiBari
-
-
Not on the HydraMatic.
-
Permalink Reply by Russ Austin on
-
I have a bracket that hooks up to Edelbrock carbs for the TV rod. Comes with the attaching hardware, you just drill 1 hole in the stock bracket.
50.00 plus shipping. Please email me at russ@thecadishack.com
Photos
Members
Forum
63 Cadillac no electrical power
Started by David Erickson in General Discussion. Last reply by Dennis P. DiBari 10 hours ago. 1 Reply 0 Likes
I have a 63 cadillac park avenue. My bulbs in the door panels in the front driver and passenger sides were out. I replaced them today and no illumination. My battery is fully charged and I tried…Continue
DIDGAKNOWTHAT? - Notches for Holding License Plate Door Open when "Filling Up!"
Started by Jason Edge in General Discussion. Last reply by Jason Edge 20 hours ago. 3 Replies 0 Likes
I casually mentioned during our Zoom meeting Sunday that there are notches for using the gas cap to hold the license plate door open while filling up and a couple of members indicated they did not…Continue
Hesitation on starting after driving
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Friday. 28 Replies 0 Likes
I have noticed that after I drive for 5-10 miles or more and then shut off the car, it hesitates when I go to start? Anyone experience this before and if so, what was the fix?Continue
Rear Main Seal Oil Leak Fix with Bearing Cap Modification
Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Dave Fehrle on Friday. 12 Replies 4 Likes
Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue
Blog Posts
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Vintage Air AC
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
accumulator dryer
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Events
-
December 15, 2024 - 63/64 Cadillac Chapter Zoom Meet-Up
December 15, 2024 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes
Videos
© 2024 Created by Jason Edge.
Powered by
