Transmission questions
Hello all. New member and new to classic cadillacs so I have some questions. Last year I got my hands on a resto-mod 63 coupe deville project and have been making good progress till now. I don't have any of the original throttle linkage/pedal assembly including the TV rod. Would not having the TV rod hooked up yet cause the transmission not to upshift?
Replies to This Discussion
-
Permalink Reply by Dennis P. DiBari on
-
Hi James,
Albeit I am not an expert on transmissions, that TV rod should be hooked up to the linkage, especially when higher throttle is used. Maybe Jason Edge would have the TV rod off of one of the parts cars? Pretty sure it is a must with the Hydra-matic transmission.
Dennis DiBari, Cottekill, NY
-
Permalink Reply by James Fraschieri on
-
Most of my experience is with small block chevys so I'm a bit out of my wheelhouse on this one but I'm enjoying learning new stuff. I have never been very good with transmissions in the first place so this hydra matic is completely unknown territory to me
-
Permalink Reply by Jason Edge on
-
I am not a Hydra-Matic expert but do know you need the TV Rod. I have them like new gold cadmium plated for $65 ($48.75 for Chapter Members) with the correct connectors at both ends to connect to transmission at bottom and carb throttle plate at top. You can see them by Clicking Here.
If interested in one of mine, or other parts, email me at jasonedge64@outlook.com
-
-
My problem is I have none of the original throttle assembly so I will have to fabricate something which won't be an issue. Is there anything vacuum controlled on the transmission?
-
-
There is no vacuum to the 1963/64 Hydramatic. The Turbo Hydramatic introduced in 1964 on certain body styles had a vacuum modulator but not the HydraMatic.
-
-
James,
There should be a vacuum modulator on the side of the transmission.
Dennis DiBari
-
-
Not on the HydraMatic.
-
Permalink Reply by Russ Austin on
-
I have a bracket that hooks up to Edelbrock carbs for the TV rod. Comes with the attaching hardware, you just drill 1 hole in the stock bracket.
50.00 plus shipping. Please email me at russ@thecadishack.com
Members
-
Kenneth Barton Online
-
-
-
Travis J. Hensley Online
-
-
Forum
1963 AC evaporator core leaking?
Started by Mark Geertsma in 1963/64 Cadillac Specific Discussion. Last reply by Mark Geertsma 1 hour ago. 3 Replies 0 Likes
Hi all,Again I have issues with my AC system. Had it refilled recently but within a few days the system was empty again. The AC mechanic added tracer fluid to check for leaks, but there are no…Continue
Tags: 1963, core, evaporator, AC
Bleeding brakes
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Tony Prichard 13 hours ago. 4 Replies 0 Likes
I have finished replacing all the rear suspension and am at the last item, which is bleeding the rear brakes. I am using the Jason Edge vacuum pump method and all went well with the rear passenger…Continue
Power steering fluid
Started by Bobby Brown in General Discussion. Last reply by Tony Prichard 13 hours ago. 7 Replies 0 Likes
My reservoir is a little low. Any recommendations on my purchase of refill fluid? There are likely new fluids and I’d like to buy the right product. Thanks. Continue
seat foam replacement
Started by Kevin Robles in 1963/64 Cadillac Specific Discussion. Last reply by Kevin Robles on Wednesday. 3 Replies 0 Likes
does anyone out there have any experience with seat foam replacement on a 63/64 Cadillac. I had my seats reupolstered many years ago in original leather/fabric and they still look great, but the…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
-
July 20, 2024 - 63/64 Cadillac Chapter Zoom Meet-Up
July 20, 2025 from 8pm to 9:30pm – Zoom
0 Comments 0 Likes
Videos
© 2025 Created by Jason Edge.
Powered by
