Trivia Question 16 - Standard Item You could Delete for Reduced Cost?
OK. Here's a new trivia. There is at least one main standard (non-option) item that one could "delete" on a new 1963 or 1964 Cadillac for a reduced cost. What is it? For extra cigars, what is the stipulation regarding this special delete item?
Replies to This Discussion
-
Permalink Reply by Kurt on
-
Relax Kev, I'm sure a Fleetwood buyer wouldn't bother thinking of any equipment to delete. You were screwed on this question, Better luck with the next one : )
-
Permalink Reply by 2o93f8rdftyzj on
-
I don't mind the getting screwed bit, but he could buy me a drink first and while we're at it, a bit of love lube wouldn't go astray either. :-) LOL
-
Permalink Reply by Jason Edge on
-
Kevin, Better get the lube ready... I got a real easy one for ya over there on Trivia # 17!!!
-
-
Jason, thinking about this, I guess they had a control panel that only had left & right vents, correct? It would be interesting to actually find a car that was ordered that way.
-
-
Kurt, Not sure if you would still have venting with a no-heat car? My thought for a no heat car would be no venting, blank plate in dash, kick panels would be solid like on an AC car, plate on the blower motor air inlet area on firewall. Of course dash would be like a no-AC car with no holes for AC ducts.
- ‹ Previous
- 1
- 2
- Next ›
Members
Forum
Replace Choke Tube or Install Electric Choke?
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by CHRIS CARLSON yesterday. 8 Replies 1 Like
My mechanic has sourced a choke housing and new internals. As you might expect, the choke tube is damaged and or clogged. My options are to either replace the choke tube, or my mechanic recommends…Continue
Tags: Electric Choke, Choke Tube
TH400 Dipstick Tube Seal
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Michael Buonaccorso on Monday. 10 Replies 0 Likes
In my “rebuild” of the transmission, I ordered a dipstick tube seal. However, I’m not sure if the right one came or how to best install the seal. I am wondering if anyone has replaced this seal OR…Continue
window regulators
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Frank Murch on Saturday. 2 Replies 0 Likes
For years my winds have seemed to be looser and less accurate than most modern windows. I am thinking the soft parts are worn. Has anybody gone through thier window regulators and felts to restore…Continue
Correct whitewalls
Started by Richard Stanley in 1963/64 Cadillac Specific Discussion on Thursday. 0 Replies 0 Likes
I just replaced my tires from Diamondback (I had bad results in the past from Coker). It was the second time, due to the age of the tires. About 18 years ago Diamondback made custom whitewalls…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
© 2025 Created by Jason Edge.
Powered by
