In addition to serving as the front engine cover, the 1963/64 Cadillac front engine cover also provides mounting for several other engine components. Who can list them out for the cigar?
Tags:
This was definitely a group effort and Russ, Tony and Robert all get a cigar!
So here is a recap of components the front engine cover provides mounting, in addition to serving as the front cover, and providing timing marks:
oil pump, fuel pump, water pump, distributor, oil filter, oil filler tube, front seal, and partially for the oil pan.
Y'all forgot about the fuel filter housing.
Not mounted to front cover, but is mounted to oil filler tube which Robert added. ...and of course oil filler tube also provides mounting for the oil filler tube cap. If we did the “Kevin Bacon” 2nd degree of mounting the list would probably run the into the dozens. Point here was to list those things directly mounted to front cover.
Bottom line was that the front engine cover was the ”Swiss Army Knife” for the 1963/64 engines!
Russ, I thought about that as I was drifting off to sleep last night; wife says I should get a life...
Started by Norman Silverman in 1963/64 Cadillac Specific Discussion 12 minutes ago. 0 Replies 0 Likes
When I first got my 64 SDV about 8 years ago, the power seat made noise but didn't go anywhere. I promptly read up on it and proceeded to take the seat transmission out to clean and re-lubricate it.…Continue
Started by Jason Edge in Trivia. Last reply by Jason Edge 39 minutes ago. 3 Replies 0 Likes
Keeping the trivia "glass related":- How Many Different Windshields Were Used On All 1963 & 1964 Cadillac Body Styles? - What were the two main differences or subgroups of windshields? Hint, one…Continue
Started by Robert Alan Shannon in General Discussion. Last reply by Jason Edge on Wednesday. 3 Replies 0 Likes
Could anyone give me the Gates or Dayco number for the alternator V belt, just can't remember it and trying to get her back on the road after many years. 63 wA/CContinue
Tags: belt, V, alternartor
Started by Michael Monson in 1963/64 Cadillac Specific Discussion on Tuesday. 0 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by