December 2018 Blog Posts (4)

Brighter Headlights. What to install that won't draw too much current.

My car still has its "T-3"headlamps and they shed poor, yellow-tinted light. I'd like to replace them with something that most folks on this web site use, that would shed good light and don't heat up the wiring with too many amps. 

Survey says?

Norm

Added by Norman Silverman on December 15, 2018 at 9:07pm — 11 Comments

Although the radiator was not leaking, nor was the car running hot, I tool out the radiator today to have it boiled out and rodded out. Then I changed the oil and filter (filter is very easy to reach…

Although the radiator was not leaking, nor was the car running hot, I tool out the radiator today to have it boiled out and rodded out. Then I changed the oil and filter (filter is very easy to reach with the radiator out), then the thermostat got changed. 

I'll have the radiator back from the shop on Monday, and will reinstall it then. 

Still having…

Continue

Added by Norman Silverman on December 8, 2018 at 9:29pm — 6 Comments

Trunk Light Socket Very Strange?

I went to replace the bulb in the trunk light socket and was met by something I had never seen before: the socket appears to be made in two thicknesses. First a wide one with appropriate cut outs on the side where the bulb nipples fit in, then a long slender shaft (with a cardboard tubular insert) down to the positive contact. I've never seen anything like this. Only thing I can figure is that it is designed to have a metal rod inside the cardboard shaft that…

Continue

Added by Norman Silverman on December 4, 2018 at 10:14pm — 2 Comments

Comfortron Power Module Reinstalled; BLOWER BLOCKAGE FOUND!!

I got the rebuilt Power module back from the rebuilder and reinstalled it.

It's been a while since i posted on this topic so I will remind those reading that the main problem I have been chasing is that i can't get air out of the AC or the heater ducts-even though the heat/ac vacuum solenoid is working. Today, I found out why.

I installed the newly rebuilt Module but it…

Continue

Added by Norman Silverman on December 4, 2018 at 12:51am — 2 Comments

Monthly Archives

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

Photos

  • Add Photos
  • View All

Forum

WTB 63 Series 62 Original Trunk Material

Started by Anthony Vanacore in Wanted to Buy 6 hours ago. 0 Replies

Hello,I am looking for an original trunk for a series 62 convertible.  Condition does not need to be perfect and does not need to be complete, I am looking for a set that I can use as a template. I…Continue

Parts to replace Power Brake and Master Cylinder for 1964 Eldorado

Started by Remco Waller in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply

I have a 1964 Eldorado and based on paperwork received with the purchase the Power Brake unit & master Cylinder were never replaced. The brakes are working currently well but as pre-caution I…Continue

How to keep my soft top in good condition?

Started by Remco Waller in 1963/64 Cadillac Specific Discussion. Last reply by Remco Waller on Monday. 2 Replies

Hi, I own a 1964 Eldorado convertible since last August and would love to get some input what the best way is to keep my soft top in good conditions.Which materials to use to clean / preserve the…Continue

VAPOR LOCK?

Started by Joel A Campos in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Sunday. 4 Replies

Hi All,    I finished my 429 transplant (Still a 429) last fall and cannot get the car to run correctly.  The carburetor, a stock Rochester 4gc was fully dismantled and cleaned and put back…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2026   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service