From Jason's Garage - 1964 Cadillac Power Window Relay Testing
Quick video showing how to test a Power Window Relay from a 1964 Cadillac with case removed and things to look forward that cause them to stop working. This would be applicable for other auto electrical relays.
Comment
-
Comment by Jason Edge on August 9, 2024 at 9:53am
-
Matti, Glad the video helped. I had actually forgotten about this video!
-
Comment by Matti Roth on August 9, 2024 at 2:41am
-
Thanks Jason again!
Power windows in my 64 worked only in emergency position so I started to inspect the relay. Found out that it was stuck. Easy fix with your video instructions and now I have power windows in my caddy!
-
-
I would bypass unless you plan on adding a lock out switch... and then you run the possibility of where to mount the switch if your 63 has power door locks, since the 63 power door lock switches were mounted at very front of arm rest switch plate, instead of up on the door panel as in 1964.
-
-
Ian, The 1964 Window Relay works in conjunction with the Cut-Out switch (lock out switch), found on 1964 Cadillacs but not on 1963 Cadillacs. It is located behind the carpeted lower left kick panel and mounted to the car body via 2 5/16" hex head metal screws. It is referenced in the 1964 Cadillac Shop Manual on page 16-110, Fig 16-128. I have insured a crop in of the llustration seen in Fig 16-128 below:
-
-
Went back and added a 2nd part showing testing of continuity across the high current circuit after relay case was reinstalled.
Photos
Members
Forum
Front door handle lights not working
Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Kurt on Sunday. 1 Reply 0 Likes
My front door handle lights would not go on when I opened the doors. Bulbs were good and had power to them. Was not getting a ground. The door switch was corroded and wasn't making contact when the…Continue
lighted headlight switch
Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Saturday. 2 Replies 1 Like
I had to replace the heater core in my 63 SDV, so I decided to replace all the dash lights with LED's. and replaced all the vacuum lines. While I was in there, I added a light to the headlight switch…Continue
Rear suspension project
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Robert Alan Shannon May 13. 9 Replies 0 Likes
I’m starting the complete rear suspension update/upgrade-new springs and shocks,replacing spherical joint and bushings on yoke and control links! Just wondering if there are any tips to help with the…Continue
TV rod adjustment 1963 Cad
Started by Mark Geertsma in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin May 12. 4 Replies 0 Likes
I’m struggling with my TV rod adjustment. I’ve been trying to adjust it as per shop manual, but it’s still not OK. When cold, it shifts smoothly through all four gears, when hot, it hesitates (lots…Continue
Tags: adjustment, rod, TV
Blog Posts
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2025 Created by Jason Edge.
Powered by
You need to be a member of 63/64 Cadillac Website to add comments!
Join 63/64 Cadillac Website