Unknown part quiz , Episode 2
Hi all,
here are some parts under the hood of 64 Deville.
Do you recognize what they are?
- Attachments:
Replies to This Discussion
-
Permalink Reply by Jason Edge on
-
I will not answer these since I dismantle these cars all the time, but will give two hints:
- First two pictures are not under the hood... that is, not in the engine bay.
- Third picture is of bolts I just reinstalled in my fix of Dino.
-
Permalink Reply by Matti Roth on
-
Engine, transmission, front bumper, grille, lights, floor mat and seats are removed. Parts could be related to any of those.
-
-
Nope, head bolts are much bigger diameter than these bolts. Here are some more hints:
- bolts in 3rd picture are 1/4" diameter and bolts I have had cad plated and you can see if you pop the hood.. well if you hold your head at the right angle.
- 1st pic is brake related
- 2nd pic is transmission related
-
Permalink Reply by 2j58zilmgnj4h on
-
park brake cable clevis
trans mount to frame bolts and plate
and engine lifter valley pan bolts
-
-
Ding! Ding! Ding! You guys have a winner.
-
-
Thanks Maurice!!!
Members
Forum
Welcome Returning Member Maurice Hamelick from the Netherlands!
Started by Jason Edge in Chapter Discussion. Last reply by Maurice Hamelink yesterday. 2 Replies 1 Like
I wanted to give a shout out to returning Chapter Member Maurice Hamelick with his 1963 Four Window Sedan de Ville which was featured in our July 2016 Newsletter. Check out the newsletter via the…Continue
Rear suspension project
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Monday. 4 Replies 0 Likes
I have started my rear suspension project with the intent to replace bushings on the control links and yoke, shocks, coils and spherical joint. I have the car on jack stands and the transaxle…Continue
4,442 Pounds of Cadillac Metal Cadmium Plated! - Pick-Up 12th batch Thursday
Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari on Sunday. 3 Replies 0 Likes
Front door handle lights not working
Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Kurt May 20. 3 Replies 0 Likes
My front door handle lights would not go on when I opened the doors. Bulbs were good and had power to them. Was not getting a ground. The door switch was corroded and wasn't making contact when the…Continue
Blog Posts
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2025 Created by Jason Edge.
Powered by
