I would appreciate any info where to put those loose padding pieces under the carpet. 4  big ones are quite simple but how about those smaller triangular parts?

and where shall those long black pieces go? They are like carton with some kind of treatment

Facebook Facebook

Views: 201

Reply to This

Replies to This Discussion

The padding is just to level the floor off. The metal pan is full of dips and grooves, so just fill them in to make the floor level. 

If this is original padding I would toss it and get some newer aftermarket fire resistant padding. I know of more than one car where the exhaust caught this stuff on fire where it burned the exposed padding under the driver side where floor board was compromised. I actually use this stuff as fire starter in my old cook house! While I like staying original as I can, there is much better material out there now that is fire resistant and provide better sound proofing.  

Thanks for good reminder! I plan to put some sound deadening material to floor to resist heat as well.

Two long pieces go under the rear seat where is no carpet. Pieces have holes in place where rear seat belts are attached.

Padding pieces found their own places. They level the floor off like Russ mentioned.

Is there another material you guy think these leveling panels could be made of? Getting ready to put new carpet in and I dont have these panels anymore. Body shop threw them away

RSS

Photos

  • Add Photos
  • View All

Forum

Coolant Overflow Bottle / Reservoir for 64 Cadillac Eldorado

Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf 6 hours ago. 9 Replies

Greetings Everyone.  I read a discussion thread about "radiator and related", covering coolant overflow.  Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac?  Is there if a…Continue

Tags: Radiator, Bottle, Reservoir, Overflow, Coolant

1963 Eldorado Trim complete set

Started by Robert Dye in For Sale 15 hours ago. 0 Replies

This is complete set of nice 63 Eldorado trim. Would like to sell as complete set but have duplicates of most of the moldings that can be sold separately. I am attaching a few pictures but you can…Continue

Convertible bumper jack

Started by Alan Clark in 1963/64 Cadillac Specific Discussion. Last reply by Alan Clark on Monday. 4 Replies

My car lacks the mechanism or spring needed to hold the jack in the storage slot on the right side of the trunk.  Anyone have a picture of the item I should find?Continue

Wanted Cadillac Lasalle 2 inch Windshield Decal Sticker

Started by Doug Scarrow in Wanted to Buy. Last reply by Dennis P. DiBari on Saturday. 3 Replies

for close to 20 years I have had a lovely Club Decal on my windshield now I wish to replace the windshield and would love to buy a decal if any one has one available See attached photosContinue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service