Gentlemen,
I've been having a problem recently with my car stalling at a stop light. It happened three times. The first two was just a quick restart and the engine fired right up. The third time, I had difficulty starting her. I finally go her started and limped her home. I suspect a failing fuel pump and replace it.
The first day, the car ran great. The next day, she stalled out again when decelerating and at a stop light. I got her started and home.
This morning, I started her cold and she started right up. Drove her to the donut shop get together and then she wouldn't start initially. Got her started and home. At home I turned her off, the tried to restart her. No luck. She just cranks over. There is spark at the coil and at plug 1 (I didn't test the other plugs.). There is also fuel with pressure in the fuel filter bowl. See pick.
Here are YouTube links with the videos of attempting to start the Car, and one showing fuel shooting into the intake ports. Any thoughts what the problem might be, and running? Perhaps a float problem???
Thanks for all your input!!!
Tags:
Thanks for all of your advice. Merry Christmas to you and Ginny.
Mike
Cool video! At least now you know the culprit! Good to see you on our Zoom Chapter Chapter tonight.
Thanks, Jason.
Sorry I couldn't stay for the whole thing. I had a dinner date with my wife.
Merry Christmas and Thanks again.
Mike
Looks very similar to the hotwire pigtail I made. Keep that in your glove box. It'll get you home if you accidently lose your keys (or lock them in the trunk : )
https://6364cadillac.ning.com/forum/topics/1962-390-won-t-ignite-at...
That is fantastic. Always a good feeling to figure out and fix a problem like this! Well done!
Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 2 hours ago. 14 Replies 4 Likes
Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue
Started by Jason Edge in Restoration Discussion. Last reply by Jason Edge 13 hours ago. 6 Replies 0 Likes
First, A Big Thank You to CLC Chief Judge Bill Anderson for taking on this daunting task of overhauling the CLC judging system. The old system was very good, however, I believe what Bill and the…Continue
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Frank Murch yesterday. 3 Replies 0 Likes
Original seats had a crest on the center arm rest. Does anybody know where I could embose a crest in new material for a reupolstry?Continue
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Tuesday. 7 Replies 0 Likes
Greetings Everyone. I read a discussion thread about "radiator and related", covering coolant overflow. Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac? Is there if a…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by