Several areas in my 64 SDV body need repair and attention. Front bumbers, grille and lights came separately with the car. There is one bigger rust damage behind passenger side front wheel. Windscreen has damage but I probably could pass MOT like it is now. Front bench fabric was badly broken in driver`s area. And many small things here and there.

I started by removing everything from trunk, and it was in quite original condition. Luckily no rust problems, only some brown old glue here and there. I vacuumed parts ajd put them back. Trunk fabric needs to be glued properly in place some day.

Facebook Facebook

Views: 1007

Reply to This

Replies to This Discussion

Big step in project was yesterday: the first time to sit behind the wheel in this 64. If you think I`m happy you are right!

I do not know what is the right way to get front bench in but we did it through rear door opening. Windows down it would be easier but I have no battery yet in the car.


Congrats on the continued progress!!!   You are indeed beaming!  Better than sitting on the floor board, eh?

Front parts in place!

Looks fantastic. Also good to see  you can post again. Did you find out what the issue was?

Thanks Jason. I used your posting to test, it worked, and now all works fine.

Steering gear was leaking from steering wheel end so I removed the PS belt and moved can without power steering. Now I learned that PS need to work in MOT inspection, so I need to fix that. I thought it is big job so I bought an used steering box to be used during winter when I planned to repair the original. Then I watched couple of Youtube videos and decided to try to fix it right away. And it was actually very easy. In my case all metal parts were in good condition because the car is only 67 tmiles driven. But all rubber parts were hard and did not keep oil inside. It was first time for me to repair steering gearbox so I am very happy having again learned something new with my 64 Cadillac!

Hi Tony

I used the biggest rebuild kit available from Rockauto. Bearings included there as well.

Finally I got my 64 registered and it is ready for street traffic. Winter is coming and cruising season is over here in Finland. Already now it feels great to notice that engine runs very smooth and TH400 shifts supersoft.  Several small bits still to fix during winter. Thank you everybody for good advice and support in restoring this beauty!

Matti, We need to do a full cover Chapter Newsletter Feature on your 64 Sedan de Ville. It would be an excellent follow-up to this month's feature of Bob Schles' 63 Eldorado.  Maybe when you see Bob's restoration project write-up (hopefully in a week or two) it will inspire you to send me a few good pictures and a writeup. Your writeup can be short to long and cover any aspect of the car, but your recent restoration project would be a great subject to cover! Jason. 

Love your 64.  These cars will surprise you with comfort and quality.  Its making my 59 seem cool but meh haha.  Keep up the good work!

Thanks Tim! 

RSS

Photos

  • Add Photos
  • View All

Forum

Rear Main Seal Oil Leak Fix with Bearing Cap Modification

Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari yesterday. 14 Replies

Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue

Future of CLC Judging

Started by Jason Edge in Restoration Discussion. Last reply by Jason Edge yesterday. 6 Replies

First, A Big Thank You to CLC Chief Judge Bill Anderson for taking on this daunting task of overhauling the CLC judging system.  The old system was very good, however, I believe what Bill and the…Continue

front seat crest

Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Frank Murch on Tuesday. 3 Replies

Original seats had a crest on the center arm rest.  Does anybody know where I could embose a crest in new material for a reupolstry?Continue

Coolant Overflow Bottle / Reservoir for 64 Cadillac Eldorado

Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Tuesday. 7 Replies

Greetings Everyone.  I read a discussion thread about "radiator and related", covering coolant overflow.  Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac?  Is there if a…Continue

Tags: Radiator, Bottle, Reservoir, Overflow, Coolant

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service