I read the section: 1963 & 1964 Engine and Transmission Facts, but still in doubt if the engine block of a 63 and 64 are the same and interchangeable?
More specifically, will I be able to use all my internal parts, heads and intake from my ´63 on a ´64 block. Except for the pistons.
I found a crack in the block of my freshly rebuilt ´63 engine. Sourcing a ´63 block here in Europe is not easy, and if a ´64 block is the same except for the bore, that might ease the seach.
Tags:
If it were that easy, it would been done already. The pistons have a different pin height, so you can not just slap in 429 pistons into a 63 rotating assembly.
You can however put in a 64 engine with the Hydra Matic crank. It bolts right up to the car and transmission. I am also working on an adaptor ring so a 64 engine with the Turbo Hydramatic crank will bolt right into a 63.
Internals, other than the lifters and push rods, are different. Cylinder heads are very different due to different bore and odd size head bolts used in 64. Intakes are the same 63 to 66. Front engine covers can be swapped if you use the correct oil pump gears for that year cover. Oil pans are interchangeable. Left exhaust manifolds are the same. Right exhaust manifolds are different. 64 has 2 different crankshaft depending on transmission. Valve covers are generally interchangeable but may have some differences in external heater hose brackets.
Started by Sammy in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 2 hours ago. 5 Replies 0 Likes
Hi there,after another long pause with health and family trouble I'm back on the roadwith my CdV.Had some work on front suspension and so needed realignment of the wheels.While camber and toe in is…Continue
Started by Jason Edge in Trivia. Last reply by Jason Edge 3 hours ago. 3 Replies 0 Likes
Here is another part I have seen many times but might not be familiar to many and will post up as our next trivia question.So, looking at the pictures below ... WHAT IS IT?…Continue
Started by Jason Edge in General Discussion yesterday. 0 Replies 0 Likes
As I put our 2024 Grand National Newsletter edition together, I will also be sharing pictures of Chapter Member cars on our website and Facebook Page, etc. First up is John Warner's incredible 1963…Continue
Started by Jason Edge in 1963/64 Cadillac Specific Discussion on Monday. 0 Replies 0 Likes
So, I get the question about headers for our car from time to time, including an email this morning.Here is my standard response:"Sanderson Headers is the only company I have never known to make…Continue
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
Continue© 2024 Created by Jason Edge. Powered by