Carb noise
Is this noise normal?
file:///var/mobile/Library/SMS/Attachments/3f/15/BC6CEAEF-7328-499C-BCC6-18153DE3E63A/IMG_5863.MOV
Replies to This Discussion
-
Permalink Reply by Dennis P. DiBari on
-
Hi Dave,
Trying to help, but there is no audio/video attached to you discussion.
Dennis DiBari
-
Permalink Reply by Dave Fehrle on
-
Let’s try this one!
- Attachments:
-
-
IMG_5863.MOV, 2.5 MB
-
-
-
Hi Dave,
I was able to play your short vide/audio this time and I don't hear anything unordinary with the normal vacuum pulled through the intake. It looks like you have a Carter carburetor on your 63. I have the Rochester 4 barrel on my 64. When you adjust the two air/fuel screws, does it adjust well? Make sure the carburetor is secure with the four nuts on the intake, but don't overdo it.
-
-
Dave,
By any chance, do you know a Randy Wallick in Rockford, IL? He just moved from NY back to Rockford where he grew up? A good friend of mine!
Dennis DiBari
-
Permalink Reply by Russ Austin on
-
Thats normal. The carb is sucking in air through the primary side. The secondary side is not active until you get way into the throttle.
Members
Forum
Rear suspension project
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Dave Fehrle 3 hours ago. 3 Replies 0 Likes
I have started my rear suspension project with the intent to replace bushings on the control links and yoke, shocks, coils and spherical joint. I have the car on jack stands and the transaxle…Continue
Welcome Returning Member Maurice Hamelick from the Netherlands!
Started by Jason Edge in Chapter Discussion. Last reply by Dennis P. DiBari 8 hours ago. 1 Reply 1 Like
I wanted to give a shout out to returning Chapter Member Maurice Hamelick with his 1963 Four Window Sedan de Ville which was featured in our July 2016 Newsletter. Check out the newsletter via the…Continue
4,442 Pounds of Cadillac Metal Cadmium Plated! - Pick-Up 12th batch Thursday
Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari 15 hours ago. 3 Replies 0 Likes
Front door handle lights not working
Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Kurt on Wednesday. 3 Replies 0 Likes
My front door handle lights would not go on when I opened the doors. Bulbs were good and had power to them. Was not getting a ground. The door switch was corroded and wasn't making contact when the…Continue
Blog Posts
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2025 Created by Jason Edge.
Powered by
