Jason Edge's Discussions (2,283)

Discussions Replied To (1668) Replies Latest Activity

"Just unwrapped the Caddy, and reinstalled front fender bolts and headlight bezels, a…"

Jason Edge replied May 26, 2016 to Small Under Hood Color Correction Project Today

12 Jun 7, 2016

"Sweet! Maybe one day I will actually make it to the Raleigh Classic. As you say it i…"

Jason Edge replied May 26, 2016 to Small Under Hood Color Correction Project Today

12 Jun 7, 2016

"Ha! I do have the timing of it down.... prime,  wait 20 to 30 minutes, 1st top coat,…"

Jason Edge replied May 26, 2016 to Small Under Hood Color Correction Project Today

12 Jun 7, 2016

"All alignment specs for bias ply and radials are on our Alignment help page at http:…"

Jason Edge replied May 21, 2016 to Shock Problem - 63 SDV

6 May 22, 2016
Reply by Tom Bahner

"Tom, I have run that exact same shock for 15 years on my 64 CDV and popped under my…"

Jason Edge replied May 21, 2016 to Shock Problem - 63 SDV

6 May 22, 2016
Reply by Tom Bahner

"Just to be 100% clear, there are two 12 volt feeds at the radio connector - one for…"

Jason Edge replied May 18, 2016 to Power Antenna

6 May 18, 2016
Reply by Jason Edge

"Unplug the connector on radio and make sure antenna feed connector has 12 volts with…"

Jason Edge replied May 17, 2016 to Power Antenna

6 May 18, 2016
Reply by Jason Edge

"The antenna has a separate 14 amp fuse from the radio's 7.5 amp fuse. Did you check…"

Jason Edge replied May 17, 2016 to Power Antenna

6 May 18, 2016
Reply by Jason Edge

"Hi Phil, you can often pull the case off the switch body, cleans the contacts and be…"

Jason Edge replied May 1, 2016 to Need drivers window switch 64 Deville convertible

8 Jun 7, 2016

"The original posting with details can be found at this link: http://6364cadillac.nin…"

Jason Edge replied Apr 30, 2016 to 1964 Fleetwood

1 Apr 30, 2016
Reply by Jason Edge

RSS

Photos

  • Add Photos
  • View All

Forum

A Big Shout Out in Pictures to Robert Kirnard and His 49K Mile 1964 Fleetwood 60 Special!

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 2 hours ago. 1 Reply

A Big Shout Out to Robert Kirnard, 1963-64 Cadillac Chapter Member, who just picked up this super clean and great running 49K Mile 1964 Fleetwood 60 Special. He drove it to our Carolina Region CLC…Continue

Comfort Control working as it should

Started by Christian Doerk in General Discussion. Last reply by Chris McBride 6 hours ago. 1 Reply

Hi friends,after checking all the functions of my Comfort Control of my 1964 Fleetwood, everything is working as it should. The control of the temperature is working really well, except one…Continue

Tags: Control, Comfort

Rear Main Seal Oil Leak Fix with Bearing Cap Modification

Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Christian Doerk yesterday. 18 Replies

Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue

Coolant Overflow Bottle / Reservoir for 64 Cadillac Eldorado

Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Thursday. 9 Replies

Greetings Everyone.  I read a discussion thread about "radiator and related", covering coolant overflow.  Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac?  Is there if a…Continue

Tags: Radiator, Bottle, Reservoir, Overflow, Coolant

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Events

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service