Matti Roth's Discussions (130)

Discussions Replied To (113) Replies Latest Activity

"Got Rochester rebuilt so next task to check TH400 condition. Two bolts from extensio…"

Matti Roth replied Jan 25, 2022 to 429 restoration

78 Mar 8, 2023
Reply by Matti Roth

"Pin with spring is supposed to lock to groove and keep the knob and stem there. Mayb…"

Matti Roth replied Jan 19, 2022 to Lights switch puller

5 Jan 20, 2022

"Finally I noticed that original choke will work even if I block the exhaust passage.…"

Matti Roth replied Jan 17, 2022 to 429 restoration

78 Mar 8, 2023
Reply by Matti Roth

"1 Aquamarine 2 Red 3 Blue 4 Gold 5 Green"

Matti Roth replied Jan 16, 2022 to Trivia Question 22 - 1963 Eldorado Exterior Paint Colors

6 Jan 16, 2022
Reply by Jason Edge

"I agree if you want to block exhaust passage completely. But I would like to maintai…"

Matti Roth replied Jan 16, 2022 to 429 restoration

78 Mar 8, 2023
Reply by Matti Roth

"I refurbished the original carburator with Hygrade rebulld kit. Parts were in good c…"

Matti Roth replied Jan 16, 2022 to 429 restoration

78 Mar 8, 2023
Reply by Matti Roth

"Thanks Ken I am expecting something similar during my project."

Matti Roth replied Jan 9, 2022 to 429 restoration

78 Mar 8, 2023
Reply by Matti Roth

"It is my first time installing engine to car and I plan as follows: - transmission a…"

Matti Roth replied Jan 7, 2022 to 429 restoration

78 Mar 8, 2023
Reply by Matti Roth

"Bits and pieces are finding their places slowly. Big thanks to Jason for support. i…"

Matti Roth replied Jan 7, 2022 to 429 restoration

78 Mar 8, 2023
Reply by Matti Roth

"I am using roll pins as a dowel. "

Matti Roth replied Jan 1, 2022 to 429 restoration

78 Mar 8, 2023
Reply by Matti Roth

RSS

Photos

  • Add Photos
  • View All

Forum

Comfort Control working as it should

Started by Christian Doerk in General Discussion 3 hours ago. 0 Replies

Hi friends,after checking all the functions of my Comfort Control of my 1964 Fleetwood, everything is working as it should. The control of the temperature is working really well, except one…Continue

Tags: Control, Comfort

Rear Main Seal Oil Leak Fix with Bearing Cap Modification

Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Christian Doerk 4 hours ago. 18 Replies

Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue

Coolant Overflow Bottle / Reservoir for 64 Cadillac Eldorado

Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Thursday. 9 Replies

Greetings Everyone.  I read a discussion thread about "radiator and related", covering coolant overflow.  Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac?  Is there if a…Continue

Tags: Radiator, Bottle, Reservoir, Overflow, Coolant

1963 Eldorado Trim complete set

Started by Robert Dye in For Sale on Thursday. 0 Replies

This is complete set of nice 63 Eldorado trim. Would like to sell as complete set but have duplicates of most of the moldings that can be sold separately. I am attaching a few pictures but you can…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Events

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service