When I purchased my 64 Fleetwood, one of the letters on the drivers side was missing, buy the time I drove it over 200 miles home, I had lost another letter. Now, almost a year later, I have an " EE WOOD " on the drivers side.
I was lucky enough to find two full replacements (boy they were NOT cheap) that appear to be either NOS or a New Repop. Either way, they look GREAT!
What is the best way to secure these back on to the fender? I believe from the factory, there were clips on the back side. Without removing the fender, I don't think I can re clip them back on.
Suggestions on getting them back in there and to STAY PUT so I am not throwing money away?
As always, thanks for the help!
Logan
Tags:
On one side, I don’t have the holes since it’s a replacement fender from a non-fleetwood. So I ground off the pegs and just put glue on the backside of the letter. On the other side, I have the pegs so I used a little on the back of the letter and a little on the peg. Just be careful putting too much on the peg because if will get messy.
Started by Alan Grst in Wanted to Buy. Last reply by Russ Austin 3 hours ago. 1 Reply 0 Likes
Greetings,I am looking for an intake manifold for a '64 429.Thanks!Continue
Started by Daniela in 1963/64 Cadillac Specific Discussion. Last reply by C. Van Tune yesterday. 11 Replies 0 Likes
All,I can’t believe I have to ask for help again. I really thought I was done with repairs. I did drive my 63 Eldorado a couple of times on side roads and all was good. last week I took it out bc it…Continue
Tags: overheating, transmission, NewRadiator
Started by Doug Scarrow in For Sale on Wednesday. 0 Replies 0 Likes
just listed rebuilt 61 thru 63 Cadillac Headlamp switch exceptional part works as good as new https://www.ebay.ca/itm/266985683232.Continue
Started by John C. Churchill in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Tuesday. 1 Reply 0 Likes
I will need to replenish/change the fluid/oil in my 64 Eldorado’s positraction differential. Now that sperm whale oil is no longer available as an additive, what is the proper oil to use, and where…Continue
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
ContinuePosted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
© 2024 Created by Jason Edge. Powered by