I’m almost positive this will lead to some polarizing comments, but I am curious as to everyone’s thoughts.

TL:DR

I found some wreaths and emblems that were in almost mint condition on a newer set of covers. As it turns out, they fit the same mounting holes and are identical to the emblems used on 1963/64 hubcaps. I used one of my rougher 64 covers and mounted the wreath on. Thoughts?

Long:

A few weeks ago, I attended an estate auction that had massive amounts of car parts. There weren’t many Cadillac items, but I did find some old taillights and several hubcaps from various years of Cadillac. In that batch were 4 hubcaps from the 80’s I’m being told (in another post on another group). On these caps were the emblem and wreath. I cleaned them up over the weekend and thought they would fit on the 64 covers. So I ran the speed nuts off the back of both the 80s cover and the 64 cover and sure enough, they are identical.

Now, I have a Fleetwood. In 64, as I am sure you know, the wreath was used in place of the ‘V’ for Fleetwoods and Eldorados. Being that everywhere else on the car, a wreath is present, I thought it odd the wheel covers lacked the wreath. So, I made a template and sacrificed *shrieks* one of my rougher 64 covers to see how it looks. Well, what do we think? Process was pretty easy, drill a few holes and swapped the wreath and emblem over.

Personally, I think I’ll be doing this to my other covers as it then matches everything else on the car. I don’t normally believe in these types of modifications, but I think this is a good one! Not sure anyone would notice expect for any of us who know.

I think I may have this set polished and the black removed and just keep it polished and use my custom covers for non judged events and keep my good set that I daily for judged events. Just my two cents 

Facebook Facebook

Views: 45

Attachments:

Reply to This

Replies to This Discussion

Logan,

     You did a great job with the hubcaps - I think they look great.  They would look great on my 64.

Dennis DiBari, Cottekill, NY

RSS

Photos

  • Add Photos
  • View All

Forum

Back to the 50’s

Started by Jordan Johansen-Moe in 1963/64 Cadillac Specific Discussion. Last reply by CHRIS CARLSON 1 hour ago. 1 Reply

Is anyone here planning on going to the Back to the 50’s car show in Minnesota?

where to find 1963 Cadillac Plastic Door Pin Anchors

Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 2 Replies

Hi allwhere can I find these - 1963 Cadillac Plastic Door Pin Anchors. Mine are from1963 and a little tiredThanksContinue

Rear Main Seal Oil Leak Fix with Bearing Cap Modification

Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Matti Roth on Saturday. 15 Replies

Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue

Future of CLC Judging

Started by Jason Edge in Restoration Discussion. Last reply by Jason Edge on Thursday. 6 Replies

First, A Big Thank You to CLC Chief Judge Bill Anderson for taking on this daunting task of overhauling the CLC judging system.  The old system was very good, however, I believe what Bill and the…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service