A Little Bit More Cad Bling to Dino Today
I have generally been installing the cadmium hardware as I go on my 64 Coupe de Ville "Dino" and using it for posting pictures but have a few items I never got around to. I installed the cad plated fender skirt brackets on one side as it rained outside. Here's a quick view of the one side I did:
Replies to This Discussion
-
Permalink Reply by Michael Forte on
-
Mine are covered in undercoat and road grime. Who knew they could look so good?! Nice detail!
-
Permalink Reply by Jason Edge on
-
Yep, mine had the road grime and undercoating also. What I noticed and guess I knew since I have parted so many out there is quite a bit of in and out and up and down adjustment for the skirt with these brackets. I was able to pull mine out a bit and line up the skirt to body line a bit better as I installed the bracket. I assumed this would be the case and one reason I wasn't in a big hurry to just throw the brackets on there. You have to savor and take advantage of these slight upgrades! LOL
-
-
Just to add... many understandably feel compelled to go replaced their tired, dulled stock hubcaps (wheel covers) with spoke wheels, etc.; however, with nice original covers and center caps, I have always thought these were gorgeous wheel covers. Yes, I am a bit biased.
Members
Forum
Dino Radiator Leak - Time to Recore!
Started by Jason Edge in General Discussion. Last reply by Bill Wolf 16 hours ago. 36 Replies 0 Likes
I had brought up the topic of radiator leaks as a discussion topic for our Chapter Zoom meet-up this past Sunday and thought I would share on our website for everyone and probably do a more formal…Continue
front seat crest
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf yesterday. 2 Replies 0 Likes
Original seats had a crest on the center arm rest. Does anybody know where I could embose a crest in new material for a reupolstry?Continue
64 Replacing dash illumination lights-how much has to come out to get to all of them?
Started by Norman Silverman in General Discussion. Last reply by Norman Silverman on Thursday. 11 Replies 0 Likes
Hello AllI have taken off my dash top and started replacing dash bulbs with LED's for greater visibility. Some questions:1) To replace the Gauge bulb it looks like easier access is had by removing…Continue
Correct whitewalls
Started by Richard Stanley in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Wednesday. 3 Replies 0 Likes
I just replaced my tires from Diamondback (I had bad results in the past from Coker). It was the second time, due to the age of the tires. About 18 years ago Diamondback made custom whitewalls…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
© 2025 Created by Jason Edge.
Powered by
