tosh put the ccp kit on my 1963 caddy last year.their are 2 of them,one for stock one for larger wheels thru opgi I bought the stock wheels.master cyl.,rotors,spacers,and everything you need.i love them stop nice and straight,no more adjusting .me and a friend put in.only problem I had I lost a spacer that sit in master cyl.they had to send me a new one ,took couple of days.carefull when removing master cyl. out of box 

Views: 132

Reply to This

Replies to This Discussion

Thanks for the info.  Do you happen happen to have the part number for the kit you bought?  OPGI was adamant that their CPP kits would not fit stock wheels!

Just talked to OPGI again and they are adamant that the CPP kits do not fit the stock rims.

I did get the latest Kanter catalog in the mail and they list a kit for $1,129 and it states it fits the stock rims.  I sent them a note to ask for confirmation and see who manufactures the kit.

RSS

Photos

  • Add Photos
  • View All

Forum

GN adventure

Started by john w. warner in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 2 Replies

The center cap on my 63 wagon came off and ruined the valve stem. But a quick tow back to White Post Resto for a new stem and a gouge removal got us back on the road! Both wagons made it.Continue

Show Your Vintage, Antique or Personalized License Plate!

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Monday. 14 Replies

I recently brought in an original, unrestored 1963 Indiana license plate…Continue

63 and 64 engine block interchangeable?

Started by Henrik Sonne Hansen in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge Jun 11. 2 Replies

I read the section: 1963 & 1964 Engine and Transmission Facts, but still in doubt if the engine block of a 63 and 64 are the same and interchangeable?More specifically, will I be able to use all…Continue

Stuck Throttle

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb Jun 10. 8 Replies

While out for a Sunday cruise this afternoon, I had a small heart attack when I opened up the throttle a bit and went to let off, only to have the ol girl keep going. Luckily, I was on a straight…Continue

Blog Posts

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

'63 Eldorado trumpet horn + 2 standard horns restoration

Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment

My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns. 

There is a restoration service called The Horn Works who my son…

Continue

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service