Center Console
Hello! As I am driving my 64 more frequently (actually its my daily driver right now as my 08 CTS is in the shop) and I am realizing I need a cupholder or something. I am attempting to build one and we shall see how that goes.
But I am wondering if there are any commercially available consoles that work for our cars? Something that can just be installed-No drilling, No modifications. Just something practical and looks decent. Let me know what y'all use, if anything!
Thanks!
Logan.
Replies to This Discussion
-
Permalink Reply by 3ft7bqmb7dryo on
-
None custom built readily available. It seems that Face Book scammers has targeted folks on this particular interest, be wary.
-
Permalink Reply by Robert Schles on
-
I had a cup hold made for my 64 by Cup Holders Plus https://www.cupholdersplus.com. It works great. It sits on the hump just under the radio, very convenient for hold a cup of coffee and cell phone.
-
Permalink Reply by Michael Vogler on
-
Yes there is. I got mine from OPGI in black and it’s awesome. Fits right over the transmission well hump like a glove. Lifts right in and out. Here’s the link. https://www.opgi.com/interior-accessories/console/hump-hugger-conso...
Mike
-
-
OPGI gets them from Cup Holders Plus. Here's a picture:
Members
-
-
-
Travis J. Hensley Online
Forum
Bleeding brakes
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin 4 hours ago. 3 Replies 0 Likes
I have finished replacing all the rear suspension and am at the last item, which is bleeding the rear brakes. I am using the Jason Edge vacuum pump method and all went well with the rear passenger…Continue
Front grill
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari yesterday. 8 Replies 0 Likes
Hi everyone im currently restoring my my front grill due to some previous clown painting it with silver frost paint and doing a dodgy job I would like to know what parts of the grill are anodised.it…Continue
Getting hot when going fast…
Started by Mack in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari yesterday. 6 Replies 0 Likes
So… I do have a few of 63 Coupes, all have same setup with carbs, Pertronix, shroud, new US Radiator radiators etc … but only one of them gets a bit hot when I am hauling faster than 60mph and car…Continue
Rainstorm out of nowhere!
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply 0 Likes
After dinner last night, we went for a quick cruise as the weather was cooler and the sun set was looking really good!Out of nowhere, a pop up shower appeared overhead and down-poured as we were…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
-
July 20, 2024 - 63/64 Cadillac Chapter Zoom Meet-Up
July 20, 2025 from 8pm to 9:30pm – Zoom
0 Comments 0 Likes
Videos
© 2025 Created by Jason Edge.
Powered by
