I've been working on a wiring diagram for my '63 Series 62 Convertible. I've merged diagrams from a bunch of sources including postings here and the Shop Manual. I also gained info just by looking at my car. The diagram includes wires in generally correct colors, color and wire gauge (when I could find it) labels, connectors, and original bulb numbers.
It is useful to me, and I suspect others might find it useful too, so here it is. It prints best on 11 by 17 paper, but it is generally usable on letter size paper too.
This version does not incorporate the Autronic Eye, but I will add that sometime and post an update.
If you see any errors or have any suggestions, please let me know and I'll make an update.
I am not sure if this site reduces the resolution of images, but just in case, you can find the full-size high resolution image of the diagram here: https://live.staticflickr.com/65535/49974711807_bb276f2420_o.png
The link above will also always have the most updated version of the diagram.
p.s. I know I could have just bought the color diagram, but putting this together gave me a diagram (mostly) specific to my car, and it helped me see how everything is connected.
Tags:
Looks great. Just click on the image to enlarge. I saved the pic to out Wiring Schematics Help Page. Thanks for sharing!
would this be close to a 2 door hardtop? all but a few extra wires for the top? Or does anyone have one for a series 62 64
Travis J. Hensley Online
Started by Kevin Robles in 1963/64 Cadillac Specific Discussion. Last reply by Kevin Robles 14 hours ago. 3 Replies 0 Likes
does anyone out there have any experience with seat foam replacement on a 63/64 Cadillac. I had my seats reupolstered many years ago in original leather/fabric and they still look great, but the…Continue
Started by tim sparks in General Discussion 20 hours ago. 0 Replies 0 Likes
anybody have an xtra stainless steel shim for 1963 carter afb carb. thank youContinue
Started by CHRIS CARLSON in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari yesterday. 1 Reply 0 Likes
Hey fellas if you're rebuilding your 429 check your timing cover for corrosion behind the water pump Russ and I had 429 engine number two on the dyno today had shimed the oil pump spring for a…Continue
Started by Alan Clark in 1963/64 Cadillac Specific Discussion. Last reply by Alan Clark yesterday. 13 Replies 0 Likes
My car lacks the mechanism or spring needed to hold the jack in the storage slot on the right side of the trunk. Anyone have a picture of the item I should find?Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
July 20, 2025 from 8pm to 9:30pm – Zoom
0 Comments 0 Likes
© 2025 Created by Jason Edge.
Powered by