Gentlemen,

Friday morning began with the dash painting complete. I spent the next day and a half putting the dash and instrument panel back together along with an upgraded radio and speakers. The rebuilt radio works and sounds great! It works like the original, with a new amp and bluetooth.  It’s fantastic! 
I changed the panel bulbs to high intensity halogen ones. At night, the instruments appear clear and bright. 
It was a slow process that tested my patience, but I stayed calm and focused and got it done by Saturday mid day.  It looks great and was so worth it!  I also rechromed the arm rests control bezels.  
Mike

 

Views: 56

Reply to This

Replies to This Discussion

Hi Mike,

     You did a fantastic job on your dashboard and radio renewal.  The pictures you posted look great.  Quite a bit of work that deserves a lot of credit!

Dennis DiBari

Thank you,Dennis.

This was my first dash rebuild and I was a little anxious. But, I figured, “How do you eat an elephant? One spoon at a time.”  I took my time, and stopped when I began to feel frustrated and tired. The dash came together as it should have with just one little squawk: the top switch failed.  Otherwise, I’m very pleased with the outcome.

Mike

Mike,

     Encomium to you!  I never tackled an entire dashboard, and you deserve so much credit.  It turned out great.

Dennis DiBari

Nice! Do you have any video of how to remove the dash top?

Thanks

RSS

Photos

  • Add Photos
  • View All

Forum

Clock Removal

Started by Jeff Donaldson in General Discussion. Last reply by Jason Edge 15 hours ago. 2 Replies

Hello Everyone,I tried to remove my clock today and couldn't seem to get it to rotate more than a 16th to an 8th of an inch. I followed the instuctions in the manual (counterclockwise approximately…Continue

Dino Diaries - All Jacked Up For Christmas!

Started by Jason Edge in General Discussion yesterday. 0 Replies

I have very limited space in my 3 bay garage with the left and right bay used for storage and work tables, etc leaving the narrow center aisle for my 1964 Coupe de Ville Dino. Six years ago I bought…Continue

Power Brake Booster

Started by Stephen Pechenik in General Discussion. Last reply by Bill Wolf yesterday. 13 Replies

Hello Co-Members,I recently purchased a  low mileage1963 Sedan Deville Park Avenue.  It is extremely solid and runs well.  Neverthelss, it has minor problems that need to be addressed before I can…Continue

Body side molding install help needed

Started by Wayne Morris in 1963/64 Cadillac Specific Discussion. Last reply by Wayne Morris on Saturday. 6 Replies

I am in the process of trying to install body side molding. I have completed installing the two front fender pieces and now trying ti figure out the rest.…Continue

Blog Posts

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service