We recently featured the Tech Tip De-Yellowing Convertible Rear Plastic Windows by Jaye Koppenhaver in the February 2017 63/64 Cadillac Chapter Newsletter. I have uploaded it to our website and will link to this thread in from our Help Page.
Here is the link to the article: De-Yellowing Convertible Rear Plastic Windows
Tags:
Excellent tech tip.
I wish I knew about this sooner. I decided to get a new rear plastic window because of the yellow and I saw some cracking. What I do now is before I put the top down which is a map folding science all its own is to unzip the window and lay it open in the trunk. I also with the new window began using some stuff I have used for years on my boat plastic side windows called Klear-To-Sea. It has a cost to it but it does do what the label says, namely anti-fog, anti finger print, anti-smudge, reduces glare, and semi repairs small not too deep scratches. I'm not pushing the product but it works on the boat where if the same stupid stuff happened in my car those people would be walking
The convertible top manual (previously posted on this site), suggests releasing the top from the front windshield locks to reduce strain before unzipping the rear window.
Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari yesterday. 14 Replies 4 Likes
Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue
Started by Jason Edge in Restoration Discussion. Last reply by Jason Edge yesterday. 6 Replies 0 Likes
First, A Big Thank You to CLC Chief Judge Bill Anderson for taking on this daunting task of overhauling the CLC judging system. The old system was very good, however, I believe what Bill and the…Continue
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Frank Murch on Tuesday. 3 Replies 0 Likes
Original seats had a crest on the center arm rest. Does anybody know where I could embose a crest in new material for a reupolstry?Continue
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Tuesday. 7 Replies 0 Likes
Greetings Everyone. I read a discussion thread about "radiator and related", covering coolant overflow. Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac? Is there if a…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by