Dino Wiper Swap
Yesterday I finally pulled my already very nice windshield wiper motor and washer pump assembly in my 64 Coupe de Ville 'Dino', to replace with a rebuilt unit I have had a couple of years and recorded a quick video before removing. Here is that video clip testing the one I removed, then a picture of the rebuilt one installed. Both were very nice motor/washer pump assembles. The old one went shipped out to a Chapter Member today.
Replies to This Discussion
-
Permalink Reply by Logan Robb on
-
Great video. Wondering if you could post a pic of the actual nozzles on the cowl? This is a future project on my 64 Fltwd and would like to come back to this thread.
-
Permalink Reply by Jason Edge on
-
Logan, Are yours missing? If so, I have plenty of the washer jet and nozzles as seen below for $10 each side. Email me at jasonedge64@outlook.com.
-
-
Based off of the photo, I suppose mine are not missing. I thought there to be some piece that connects to the end of the jet there. With the eye, it looks like it would shoot off to the side, not onto the w/s.
-Logan
Photos
Members
Forum
KleerView/OptiKleen Bottle Location
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb 7 hours ago. 3 Replies 0 Likes
I just received a repop KleerView bottle and label for my 64 Fleetwood this morning. Wondering where the best location for this bottle would be? Or rather, where was it most commonly installed?I…Continue
Current 1963/64 Cadillac Listings on eBay
Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 21 hours ago. 1 Reply 5 Likes
To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue
Tags: ebay
1964 A/C Delco Parts book for Deville
Started by Mark Bartlett in General Discussion. Last reply by Jason Edge yesterday. 1 Reply 0 Likes
Is there a place to go to buy or look at original parts book ThanksssContinue
differential seal
Started by Al zink in 1963/64 Cadillac Specific Discussion. Last reply by Al zink on Monday. 2 Replies 0 Likes
Can anyone provide me with a good source for a differential seal for my 63 cadillacThanksContinue
Blog Posts
Lower Front End Ball Joints
Posted by Logan Robb on May 11, 2023 at 9:04am 7 Comments 0 Likes
Good Morning all!
I took the 64 into the shop to have some adjustments completed and in the process decided to have the lower ball joints replaced as was recommended the last time I had it in. I ordered the parts and came into the shop. They quoted me nearly $500 to replace those lower ball joints requiring nearly 4hrs of labor. Now this is a reputable shop and they know me by name here and they will continue to get my business. I am just questioning what on earth is…
Continue1964 power steering sector rebuild
Posted by CHRIS CARLSON on March 20, 2023 at 11:32pm 3 Comments 0 Likes
I'm having my steering sector rebuilt, and considering changing it from 20-1 ratio 4.2 turns lock to lock to 3.5 turns lock to lock @ 16-1 ratio, If i change from a 3 1/4" box to a 3" box i could have a 14-1 Ratio steering response would be faster, shorter distance to turn the wheel to get a response, has anyone done this? and how do you like it? thank you
1964 Daville dashboard clock
Posted by Willem Bol on March 13, 2023 at 11:33am 2 Comments 0 Likes
Hallo,
Can somebody help me finding a dashboard clock for my 1964 Cadillac DeVille Convertible?
Thank you in advance,
Willem Bol
The Netherlands
Does anyone know where I can get the bushings for AC compressor mount on the 429?
Posted by Robert Schles on February 21, 2023 at 11:45am 2 Comments 0 Likes
I've looked at the usual rubber sources but couldn't find any.
Events
© 2023 Created by Jason Edge.
Powered by
