Door lock vacuum
Hey folks. First post. I hope I'm doing it right. I currently restoring a 1964 Fleetwood 60 series Special. There is an egg shaped vacuum canister on the left side of the firewall behind the tire. It has a vacuum fitting with two connections. I am thinking one connects to a hose going inside the car. Where does the other hose go?CaddyVacCanPwrDoorLock.jpg
- Attachments:
Replies are closed for this discussion.
Replies to This Discussion
-
Permalink Reply by Jason Edge on
-
It T's into the line that goes into the vacuum fitting on back of intake. This is it's vacuum source. Here is a picture of the power door lock & power trunk tank showing the feed hose going thru fire wall then the other shoots to the passenger side and T's into that fitting on the back of the intake.
-
-
Permalink Reply by Bill Hatfield on
-
If it were not for you Jason, I'd go back to building old Mustangs .. Thanks
-
Photos
Members
Forum
Dino Diaries - Feb 28, 2025: What's Good for the Convertible is Good for the Coupe!
Started by Jason Edge in General Discussion. Last reply by Jason Edge 10 hours ago. 2 Replies 1 Like
I have made some "factory" upgrades to my 64 Coupe de Ville by installing some options available to my Coupe de Ville such as power vent windows, tilt steering column, am/fm, 3 way rearview mirror,…Continue
Sabre Spoke Wheels
Started by Alan Grst in 1963/64 Cadillac Specific Discussion 21 hours ago. 0 Replies 0 Likes
Greetings, I have a set of Kelsy Hayes Sabre Wheels # 38612. Will these fit my '64 sedan? Do I need to make any modifications?Thanks!AlanContinue
Coolant Overflow Bottle / Reservoir for 64 Cadillac Eldorado
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Chris Codd yesterday. 5 Replies 0 Likes
Greetings Everyone. I read a discussion thread about "radiator and related", covering coolant overflow. Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac? Is there if a…Continue
Dino Diaries - Feb 25, 2025 - Open Up and Say Ahh!
Started by Jason Edge in General Discussion. Last reply by Logan Robb yesterday. 5 Replies 0 Likes
Just back with a new batch of cadmium plated parts, I like to imagine Dino saying "Ahh" as I sort through the next cad plated goodies to install. This morning I installed a cad plated fuel pump to…Continue
Blog Posts
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Vintage Air AC
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Events
© 2025 Created by Jason Edge.
Powered by
