Just wondering if anyone knows of a place to get interiors done in the Pacific Northwest. I'm looking at seats, door cards and headliner. I live in the Tacoma Washington area so west side is preferable .  appreciate any help.  

Views: 300

Reply to This

Replies to This Discussion

Best to go to cruise ins and talk to people. Find out where they go and who is known for a good job.

That's Russ, thats tough this time of year in the PNW as its not cruise season. Everyone hibernates up here and works on their cars. 

Best to go to cruise ins and talk to people. Find out where they go and who is known for a good job.

Check out and join a Cadillac LaSalle Club (CLC) region in your area.   They will be an invaluable resource for networking and finding local recommendations. Here is one I see on the list of CLC regions in WA state on the Chapters & Regions page at https://www.cadillaclasalleclub.org/general/custom.asp?page=regions... :

PACIFIC NORTHWEST (1966)
Robert A. LeCoque
P.O. Box 3025
Renton, WA 98056-5025
(206) 799-6585
rLecoque@msn.com
WEBSITE

If into a member of the CLC join them at www.cadillaclasalleclub.org/join    They currently have a free 6 month free membership deal through now and the end of the year!

Thank you Jason, I will look into that 

try these guys they supposedly took over from the guy that did a great job on mine many years ago. it looked factory correct when I got it back including the crests embossed in the leather.The company is -- Texas Auto Upolstery --in Vancouver Washington
The new owner is --Emilio @ 360 771 3565

Thank you Maurice I will look them up. 

RSS

Photos

  • Add Photos
  • View All

Forum

Dino Diaries - Nov 19, 2024: Install Cad Plated Fender Skirt Brackets

Started by Jason Edge in General Discussion. Last reply by Kurt 3 hours ago. 5 Replies

Now that I am past the radiator project (and a couple of house projects), I can pick away at the my 64 Coupe de Ville Dino a bit.  Today I installed the left driver side cad plated fender skirt…Continue

Anyone Ever Hear of or Use Gary's Steering Wheels

Started by Jason Edge in Restoration Discussion. Last reply by Dennis P. DiBari 6 hours ago. 2 Replies

Scanning thru the Feb issues of Hemmings I found a listing for Gary's Steering Wheels. I didn't think I had heard of them but looked on our …Continue

Dino Diaries - All Jacked Up For Christmas!

Started by Jason Edge in General Discussion. Last reply by Logan Robb 8 hours ago. 4 Replies

I have very limited space in my 3 bay garage with the left and right bay used for storage and work tables, etc leaving the narrow center aisle for my 1964 Coupe de Ville Dino. Six years ago I bought…Continue

Dino Diaries - Turbo HydraMatic Starter Bolts Replaced

Started by Jason Edge in 1963/64 Cadillac Specific Discussion yesterday. 0 Replies

While I have most of the fasteners mapped out and selling with new cadmium plating, for the top side stuff, there are nuts, bolts and washers, etc. on the underside I have not completely mapped out.…Continue

Blog Posts

'63 Tailfin Tales

Posted by Mark Mata on January 14, 2025 at 12:06am 1 Comment

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service