I have had 2 sets of tires on my 64 Cadillac 'Dino' in the last 28 years and am scared to even look at the date code on those on there now so I went ahead and ordered a new set of the BF Goodrich 8.20-15 Silvertown Bias Plys that have have been running since day one. 

I had an issue with a front right tire on my 2013 Escalade EXT while in Gettysburg and was lucky that I have a stack of 8 new tires at home and just had my wife to ship one of the tires. This got me to thinking about my aging out tires on Dino and checked the Coker Tire site and they still have them so I just pulled the trigger. If you buy something with Coker, they are offering free shipping right now, and if you register an account they will send you a 10% discount code. So I added the tires, signed up (even though I have been dealing with them for 25 years), got my code and knocked a big chunk off the price. 

Here is the link to the tire and a picture from their site:
https://www.cokertire.com/tires/820-15-bf-goodrich-1-whitewall-tire...

Views: 41

Reply to This

Replies to This Discussion

I still love these tires but nearly everyone I talk to says DONT go back to Bias Ply. I know my Fleetwood needs front end work and that would be a big reason not to go with bias ply, but I intend to sort the front end. I just love the look of these tires. 

The only people I talk to that say to run the bias ply are the ones RUNNING them lol. 

I agree with Logan!  Bias ply for auto shows...radials for the road. Huge difference in ride and handling. 

RSS

Photos

  • Add Photos
  • View All

Forum

Windshield washer pump inoperative

Started by Wayne Morris in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari yesterday. 14 Replies

I have spent a few hours trying to get pump to pump fluid. The lines are all clear, The pump Is working as it should when the washer button is pushed. I have a spare wiper motor assembly which I have…Continue

63 vs 64 Hood V Size Difference

Started by Jason Edge in 1963/64 Cadillac Specific Discussion yesterday. 0 Replies

The 64 hood V is considerably bigger than the 63 hood V, and one of the many things I have not done in dealing with these cars on the last 3 decades was to do a direct comparison. Someone asked about…Continue

Radio Models 1963 to 1968

Started by Jason Edge in 1963/64 Cadillac Specific Discussion on Friday. 0 Replies

I sometimes get asked what radios were used in 1963 and 1964 or verification of a radio model number, so I scanned the radio listing from a 1968 Master Parts Book that covers 63 to 68 which covers…Continue

64: BULB FINALLY INSTALLED BUT CLOCK, GAUGE LIGHT AND RADIO DO NOT ILLUMINATE

Started by Norman Silverman in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Thursday. 14 Replies

HELLO ALLSo, after 4 hours work to remove and replace the bulb behind the "defrost" on the HVAC panel, the same bulbs that started me doing this are still out-even though I replaced all three of…Continue

Blog Posts

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service