Momentous day today!!!! Brought my De Ville home today. I had my transmission rebuilt at a local transmission shop. Old soul working there that knows Hydramatic Transmissions. All the leaks repaired, new clutch plates and seals, filter, fluid and he replaced the torque converter. AND, he painted it for me! I also had the transmission lines replaced.

 Wish I had more time to drive today but I managed about 50 miles of highway and city driving! First time the ole girl was on the street in over 15 years.It sure felt good! 

 Those that kept me off the edge of the cliff the other day when I couldn't get the water pump to crossover connection to seal, thank you! Two O-rings and a little blue RTV did the trick!

Facebook Facebook

Views: 86

Attachments:

Reply to This

Replies to This Discussion

Hi Scott,

     Congratulations!!!  It is a great feeling and glad you got that rebuilt.  Hopefully all the water leaks are good and happy driving.  As an original owner, we both know the feeling of driving it!!!!!

Dennis DiBari, Cottekill, NY

 Thanks Dennis. I'm pretty sure the coolant leaks are fixed. Like I wrote, I put about 50 miles on the car and a good chunk of that was highway. I kept an eye on the temperature gauge. When I got her home, nothing dripping, no funny odor, and the upper radiator hose was nice and firm. System was holding pressure!

 Hoping for the sky here to clear. We're getting lots of cloud cover and chances of rain. Some remnants of hurricane Helena ruining things. Maybe I'll get the top down soon!!

Scott,

     Great news and no leaks!  When the sun comes out after Helena, top down and another spin!

Dennis DiBari

Congratulations! Enjoy the ride. Mike

That is fantastic news ...and the engine is looking great!

Scott,

     As Jason said, the engine looks great.  It must run great as well!

Dennis DiBari

RSS

Photos

  • Add Photos
  • View All

Forum

Dino Radiator Leak - Time to Recore!

Started by Jason Edge in General Discussion. Last reply by Bill Wolf on Friday. 36 Replies

I had brought up the topic of radiator leaks as a discussion topic for our Chapter Zoom meet-up this past Sunday and thought I would share on our website for everyone and probably do a more formal…Continue

front seat crest

Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Friday. 2 Replies

Original seats had a crest on the center arm rest.  Does anybody know where I could embose a crest in new material for a reupolstry?Continue

64 Replacing dash illumination lights-how much has to come out to get to all of them?

Started by Norman Silverman in General Discussion. Last reply by Norman Silverman on Thursday. 11 Replies

Hello AllI have taken off my dash top and started replacing dash bulbs with LED's for greater visibility. Some questions:1) To replace the Gauge bulb it looks like easier access is had by removing…Continue

Correct whitewalls

Started by Richard Stanley in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Wednesday. 3 Replies

 I just replaced my tires from Diamondback (I had bad results in the past from Coker).  It was the second time, due to the age of the tires.  About 18 years ago Diamondback made custom whitewalls…Continue

Tags: width, whitewall, correct

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service