Hi I am new to this Discussion I currently purchasing a 64 Deville convertible and It has bias ply tires that are 15 year old they have L-78-15 tires and would like to put on radials . Question what is a good cross to radial tire and is l-78-15 the original tire size. Thanks Mark
Tags:
GM made radials standard on almost all of its car lines in 1975, replete with a special tread pattern developed by GM to be used with Goodyear and Firestone tire designs.
The Eldo and Fleetwood were optionally available with radials starting in the '73 model year (maybe '72 in some instances) but radials didn't become standard on all Cadillac models until 1975.
Lincoln beat Cad by a country mile, as the '70 Mark III was the first American car with radial tires. The Continental got 'em too. Michelin X, as I recall.
And yes, radials do everything better than bias-ply tires. Only for big car shows would I ever again put bias ply tires on my classic cars.
Thanks Tony! I'm full of otherwise-useless automotive trivia. Nice to have this Cadillac forum to share some of it with.
Van
Diamondback Tires will custom make your sidewall however you want it.
I special ordered a set of their tires for my '71 Imperial, and they exactly matched the Imperial-unique double-whitewall design. My car has its original spare tire, and I sent them pix of it as a guide.
I am amazed at how accurate they were able to make the new tires' sidewalls look.
No need anymore to settle for a wrong style.
Anyone know the name of the correct wheel weights? I know they are getting harder to find.
Thanks
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by David Thomas yesterday. 3 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 4 Replies 0 Likes
Here is a list of equipment percentages I had pulled from the Ward Automotive Yearbooks for 1963 and 1964 and have used for several trivia questions. I thought I would share the entire list as seen…Continue
Started by Patrick Westphal in For Sale. Last reply by Jason Edge Dec 15. 1 Reply 0 Likes
Hey everyone,I have a set of front bumpers, both ends and the center section, that I am looking to sell. If you are looking for these contact me and we will talk about it. …Continue
Started by Norman Silverman in 1963/64 Cadillac Specific Discussion. Last reply by Norman Silverman Dec 14. 5 Replies 0 Likes
Hello AllI am thinking about replacing the shocks on my 64 SDV. I want to do so with units that are closest to what was originally in the car in so far as ride quality. I believe these were gas…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by