Now that I am past the radiator project (and a couple of house projects), I can pick away at the my 64 Coupe de Ville Dino a bit. Today I installed the left driver side cad plated fender skirt brackets. Pretty straight forward leaned up my hubcap (wheel cover) a bit while I had the skirt off.
When I took the first bracket off, caked with undercoating and 60 years of road grim, etc. and flipped it over and saw the gold cadmium plating it reminded me how I often get into this 'argument' with people that look at their bolts and fasteners after being painted over, tared over, and just weathered away and tell them to flip that bolt or washer or bracket or whatever over and take a look at the plating ... it will be gold cadmium. I have saved dozens of example pictures just like this one as proof in the pudding.
Here here is the freshly plated fender skirt brackets installed:
Tags:
I am going to be working on my 64 Coupe de Ville "Dino" off and on this fall and winter and will do a "Dino Diaries" series and post updates, excursions, issues, problems, successes, etc. for discussion.
As a Chapter Member you are all encouraged to do the same with your own 63 or 64 Cadillac!
Started by Wayne Morris in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Saturday. 14 Replies 0 Likes
I have spent a few hours trying to get pump to pump fluid. The lines are all clear, The pump Is working as it should when the washer button is pushed. I have a spare wiper motor assembly which I have…Continue
Started by Jason Edge in 1963/64 Cadillac Specific Discussion on Saturday. 0 Replies 0 Likes
The 64 hood V is considerably bigger than the 63 hood V, and one of the many things I have not done in dealing with these cars on the last 3 decades was to do a direct comparison. Someone asked about…Continue
Started by Jason Edge in 1963/64 Cadillac Specific Discussion on Friday. 0 Replies 0 Likes
I sometimes get asked what radios were used in 1963 and 1964 or verification of a radio model number, so I scanned the radio listing from a 1968 Master Parts Book that covers 63 to 68 which covers…Continue
Started by Norman Silverman in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Thursday. 14 Replies 0 Likes
HELLO ALLSo, after 4 hours work to remove and replace the bulb behind the "defrost" on the HVAC panel, the same bulbs that started me doing this are still out-even though I replaced all three of…Continue
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
ContinuePosted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
© 2025 Created by Jason Edge. Powered by