Transmission questions
Hello all. New member and new to classic cadillacs so I have some questions. Last year I got my hands on a resto-mod 63 coupe deville project and have been making good progress till now. I don't have any of the original throttle linkage/pedal assembly including the TV rod. Would not having the TV rod hooked up yet cause the transmission not to upshift?
Replies to This Discussion
-
Permalink Reply by Dennis P. DiBari on
-
Hi James,
Albeit I am not an expert on transmissions, that TV rod should be hooked up to the linkage, especially when higher throttle is used. Maybe Jason Edge would have the TV rod off of one of the parts cars? Pretty sure it is a must with the Hydra-matic transmission.
Dennis DiBari, Cottekill, NY
-
Permalink Reply by James Fraschieri on
-
Most of my experience is with small block chevys so I'm a bit out of my wheelhouse on this one but I'm enjoying learning new stuff. I have never been very good with transmissions in the first place so this hydra matic is completely unknown territory to me
-
Permalink Reply by Jason Edge on
-
I am not a Hydra-Matic expert but do know you need the TV Rod. I have them like new gold cadmium plated for $65 ($48.75 for Chapter Members) with the correct connectors at both ends to connect to transmission at bottom and carb throttle plate at top. You can see them by Clicking Here.
If interested in one of mine, or other parts, email me at jasonedge64@outlook.com
-
-
My problem is I have none of the original throttle assembly so I will have to fabricate something which won't be an issue. Is there anything vacuum controlled on the transmission?
-
-
There is no vacuum to the 1963/64 Hydramatic. The Turbo Hydramatic introduced in 1964 on certain body styles had a vacuum modulator but not the HydraMatic.
-
-
James,
There should be a vacuum modulator on the side of the transmission.
Dennis DiBari
-
-
Not on the HydraMatic.
-
Permalink Reply by Russ Austin on
-
I have a bracket that hooks up to Edelbrock carbs for the TV rod. Comes with the attaching hardware, you just drill 1 hole in the stock bracket.
50.00 plus shipping. Please email me at russ@thecadishack.com
Members
Forum
Website Header - Experimenting with Rotating Member Cars
Started by Jason Edge in General Discussion. Last reply by Jason Edge yesterday. 6 Replies 2 Likes
I was thinking or rotating member 63's and 64's up in the header and used Mark Geertsma's 1963 Sedan de Ville as a test car. It gets a little grainy making the picture that small, but not too bad.…Continue
My Only Eldorado Parts Car - A 1963 Picked up in 2001
Started by Jason Edge in General Discussion. Last reply by Jason Edge yesterday. 2 Replies 0 Likes
I was thumbing thru parts car folders and run across the 63 Eldorado I parted out way back in 2006 and saw the dirty but good condition body tag. I like to clean them up I guess as a token and of…Continue
Anybody in Reno or Lake Tahoe area?
Started by Mack in 1963/64 Cadillac Specific Discussion on Sunday. 0 Replies 0 Likes
We have a group of Cadillac guys in Reno/Tahoe area and we will be cruising and participating in the local car shows this season!let me know if you’re in the area and wanting to join in.happy…Continue
Adapt, Improvise and Move an Cadillac Engine!
Started by Jason Edge in General Discussion. Last reply by Jason Edge on Friday. 3 Replies 0 Likes
Just wanted to pop in and say hello and give a quick update on a couple of things and share a garage thing I thought you might get a kick out of. First, my arm is out of the brace as of last Monday…Continue
Blog Posts
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2025 Created by Jason Edge.
Powered by
