Center Console
Hello! As I am driving my 64 more frequently (actually its my daily driver right now as my 08 CTS is in the shop) and I am realizing I need a cupholder or something. I am attempting to build one and we shall see how that goes.
But I am wondering if there are any commercially available consoles that work for our cars? Something that can just be installed-No drilling, No modifications. Just something practical and looks decent. Let me know what y'all use, if anything!
Thanks!
Logan.
Replies to This Discussion
-
Permalink Reply by 3ft7bqmb7dryo on
-
None custom built readily available. It seems that Face Book scammers has targeted folks on this particular interest, be wary.
-
Permalink Reply by Robert Schles on
-
I had a cup hold made for my 64 by Cup Holders Plus https://www.cupholdersplus.com. It works great. It sits on the hump just under the radio, very convenient for hold a cup of coffee and cell phone.
-
Permalink Reply by Michael Vogler on
-
Yes there is. I got mine from OPGI in black and it’s awesome. Fits right over the transmission well hump like a glove. Lifts right in and out. Here’s the link. https://www.opgi.com/interior-accessories/console/hump-hugger-conso...
Mike
-
-
OPGI gets them from Cup Holders Plus. Here's a picture:
Members
Forum
Houston we have a problem!
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 13 hours ago. 5 Replies 0 Likes
While enjoying the fruits of my labor on all new rear suspension and…Continue
Brake Booster not enough compression
Started by Rick Yasenchack in 1963/64 Cadillac Specific Discussion 23 hours ago. 0 Replies 0 Likes
I bought my 63 2-door convertible 62 series a few years back, previous owner said a new brake booster was just installed and that was why brake pedal was a rock. Did not know.Just had engine…Continue
Commercial Chassis Dual Battery Tray Questions
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Tuesday. 2 Replies 0 Likes
I'm looking for some info and hopefully some pictures on the commercial chassis dual battery setup. Is the second battery tray (driver side) , the same as the passenger side or is it mirrored? I'm…Continue
Meet-Up of 1964 Cadillacs in downtown El Segundo Car Show August 16
Started by Jason Edge in Chapter Discussion on Tuesday. 0 Replies 0 Likes
Chapter member Alan Clark and owner of a 1964 Eldorado sent this and wanted to share with everyone in case there are others nearby that might want to attend:"I'd like to invite the 63/64 chapter…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
Videos
Switch to the Mobile Optimized View
© 2025 Created by Jason Edge.
Powered by
