Kleer-View Bottle and Labels

Some pictures of the Kleer-View Washer Bottle with Labels Available.

  • photo
  • photo
  • photo
  • photo
  • photo
  • photo

Comment

You need to be a member of 63/64 Cadillac Website to add comments!

Join 63/64 Cadillac Website

Comment by Chris Codd on July 4, 2023 at 11:01pm

Hey Logan, I polyurethane coated the label I bought from Jason. I have yet to test it's durability as I've been doing some other resto work under the hood but it gives it a nice gloss finish and deepens the colors.

Comment by Jason Edge on July 3, 2023 at 2:06pm

Logan, they are not water proof, just heavy stock label paper. I have meant to check with Staples or my local print shop to see what they could come up with that is more water resistance. I think someone said they clear coated theirs. I simply remove mine when I might rinse out the engine compartment. I'm guessing since I posted this over 10 years ago I might have swapped out the label twice. 

Comment by Logan Robb on July 2, 2023 at 10:51pm

Jason,

the labels that you have printed-are they water proof? I’ve contemplated having a vinyl sticker made for my bottle. 

I purchased a sticker from eBay and then had copied made at Office Max and laminated it. But having a vinyl/waterproof sticker would be ideal although not original. 

Comment by Jason Edge on February 7, 2013 at 7:02pm

Seems to be many variations. I'm sticking with the one that matches the part # and style in the 1964 accessories booklet. I'm guessing they varied across makes, etc.

Comment by Jason Edge on January 15, 2013 at 10:53pm

PS.. I have the labels scanned very hi res and have a few printed in heavy full sheet label paper ready to stick on bottle for $5 + $1 1st class postage in USA.  When you buy them it is on plain non-stick paper and have to either apply adhesive or print to lable paper. If anyone wants the cool color label email me at jasonedge@nc.rr.com

Comment by Jason Edge on January 15, 2013 at 10:41pm

I've had the old black and white label that reads 'Kleer-View Windshield Washer Anti-Freeze and Bug Remover" that USA Parts and others list for 1964 Cadillacs on my dealer installed Kleer-View bottle for years.  

I've always been dissatisfied as it is quite diferent from the one listed in the 1964 Cadillac Accessories Booklet which has part 147 5059 and says 'Kleer-Viefw Windshield Washer Anti-Freeze and Gas Line De-Icer:.


I have noticed at car shows a different, maybe earlier tag that as the correct part # 147 5059, and found that Rubber the Right Way carries it and ordered it this past week abd us now installed. It is still a bit different from the advertised item in the accessories manual as it says  "Kleer-View Windshield Washer Anti-Freeze"  but the part # is correct and is closer overall to the listed washer fluid.

If anyone has found the exact lable that matches the one in the accessories label I would love to know where you found it. 

I have posted pictures in this album of both labels available, including the color one I just replaced the black and white one with.

Jason.

Photos

  • Add Photos
  • View All

Forum

Wanted - Armrests for a 63 Series 62 Coupe

Started by Jose Raul Ramirez in Wanted to Buy. Last reply by Russ Austin on Tuesday. 2 Replies

The body shop lost my armrests! I need the driver's side and passenger side. The ISSUE is my 63 did not come with power windows It has manual crank windows so the armrests are not setup for switches.…Continue

390 engine available

Started by Phil in 1963/64 Cadillac Specific Discussion on Tuesday. 0 Replies

If anyone has a need for a decent running 390 (trans available as well, but needs work), out of a 63, I have one available in the state of WA. I know it's frowned upon by some, but I'm completing an…Continue

WTB transmission cover plates

Started by Michael Monson in Wanted to Buy. Last reply by Michael Monson on Tuesday. 2 Replies

I’m looking for both the cover plate over the torque converter and the cover over the flywheel.  Apparently over the last 60 years, both have “fallen off” and now I’m looking on putting it back…Continue

Commercial Chassis Dual Battery Tray Questions

Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson on Monday. 3 Replies

I'm looking for some info and hopefully some pictures on the commercial chassis dual battery setup.  Is the second battery tray (driver side) , the same as the passenger side or is it mirrored?  I'm…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service