Hi.
Update:
I removed both 7 nipple vacuum valves and called my buddy who owns a machine shop. Tomorrow we'll re-surface the valve faces and then I'll reinstall them. HOWEVER, the one that comes out easily and comes apart with no rivet is on the Power module side. It installs on one side with a small bolt, and on the other it is held on by a clip, WHICH IS MISSING ON MY CAR. I am going to assume it is the same clip that is used on the Control Module side. Anybody got one? Happy to pay for it.
Thanks
Norm
Comment
I'm really stumped on where to tap the threads for the 4-40 screw and whether to try to do it in a way that holds the original arrangement with a rectangular clip that holds the rivet head on and provides tension between the halves. Has anybody done this repair? If yes, how?
Thanks
Noted. I want the machine shop guy to drill out the rivet and tap the old rivet head (large side) for the screw that will replace it. I intend to do the re-surfacing. The valve on the power piston side looks real good and has lubricant in it. I imagine it is still good, but I'll re-surface it anyway-a little bit.
Thanks!
Started by James Fraschieri in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin yesterday. 8 Replies 0 Likes
Hello all. New member and new to classic cadillacs so I have some questions. Last year I got my hands on a resto-mod 63 coupe deville project and have been making good progress till now. I don't have…Continue
Started by Jason Edge in Newsletters. Last reply by Dennis P. DiBari on Thursday. 1 Reply 0 Likes
I have been slowly plugging away at our next newsletter which will feature Roy Brosi's 1963 Convertible and his 1964 Airstream Camper and thought I would give you all a "Sneak Peek" at our next…Continue
Started by Tim in 1963/64 Cadillac Specific Discussion. Last reply by C. Van Tune on Thursday. 2 Replies 0 Likes
1964 Sedan Deville with the original 429 engine and TH400 transmission. Engine has approximately 91k miles on the odometer and runs very well. I've replaced the plugs with NOS AC44 plugs, replaced…Continue
Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by C. Van Tune on Thursday. 4 Replies 0 Likes
I recently brought in an original, unrestored 1963 Indiana license plate…Continue
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
Continue© 2024 Created by Jason Edge. Powered by
You need to be a member of 63/64 Cadillac Website to add comments!
Join 63/64 Cadillac Website