1964 coupe de ville
"The car is exactly the way it was when I first purchased it. I am in the process of replacing the radiator hoses with the correct clamps. I little maintenance never hurt. "
Denis Binette's Page
Latest Activity
1964 coupe de ville
"Ah, I meant servo, not transducer. I've never seen a 64 without the "steamboat". Didn't know about early recalls. Glad my 63 has simpler A/C : )"
1964 coupe de ville
"Also, with such a low mileage example (14K miles) perhaps it never failed and never needed service. I remember first seeing this car at the 2013 GN in Boston and being blown away. It was then owned by the late Chapter Member and friend Kurt…"
1964 coupe de ville
"Kurt. The retrofitted master "steamboat" switch was installed after they left the factory as a bypass to the "time delay switch which I understand was not reliable. I am sort of forgetting the timing but remember there were 2 or 3…"
1964 coupe de ville
"Did you convert your A/C to non-Comfort Control? I don't see the transducer on the blower casing."
1964 coupe de ville
"That is a clean engine bay, and n ice to se a lot of the original hardware still there ... including the cad plate bolts, hinges, etc. Ha Ha. You also have the service plate on top left side of radiator support... don't see that on a lot of…"
"Hi Denis,
The description board you posted is a work of art. I had something similar made up for my Caddy and I bring it to car shows. It's a Car Show Board showing salient features of the car. Your…"
"Hi Dennis, yes it is , have a look at the description board that I just posted. Thanks."
"Hi Denis,
I love you 64 Caddy and the pictures you posted. Looks a lot like my 64 Series 62. Your paint must be Royal Maroon #52. Welcome aboard to a great Chapter.
Dennis DiBari, Cottekill, NY"
Profile Information
- Do you own any 1963 & 1964 Cadillacs? If Yes, Year & Body Style
- 1964 coupe de ville series 62
- Cadillac LaSalle Club Membership Number? (Must be a member to Join Chapter & Website)
- 25277
- 1963/64 Cadillac Chapter Member?
- I am a car collector of Cadillac and other mixed brands
I acquire my 64 in 2012 but knew about the car since 1991. It took a long time to purchase it but it was worth the wait. Long story. I will add a picture of my display board in my photos section.
Comment Wall (3 comments)
- At 8:57am on February 27, 2025,
Dennis P. DiBari said…
Hi Denis,
The description board you posted is a work of art. I had something similar made up for my Caddy and I bring it to car shows. It's a Car Show Board showing salient features of the car. Your pictures are great!
Dennis DiBari
- At 1:02pm on February 26, 2025,
Hi Denis,
I love you 64 Caddy and the pictures you posted. Looks a lot like my 64 Series 62. Your paint must be Royal Maroon #52. Welcome aboard to a great Chapter.
Dennis DiBari, Cottekill, NY
- At 1:28pm on December 1, 2024,
Jason Edge said…
Hi Denis, Welcome to the 63/64 Cadillac Chapter website. Be sure to tell us about your 64 coupe when you get a chance. Jason.
Members
Forum
Welcome Returning Member Maurice Hamelick from the Netherlands!
Started by Jason Edge in Chapter Discussion. Last reply by Maurice Hamelink yesterday. 2 Replies 1 Like
I wanted to give a shout out to returning Chapter Member Maurice Hamelick with his 1963 Four Window Sedan de Ville which was featured in our July 2016 Newsletter. Check out the newsletter via the…Continue
Rear suspension project
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Monday. 4 Replies 0 Likes
I have started my rear suspension project with the intent to replace bushings on the control links and yoke, shocks, coils and spherical joint. I have the car on jack stands and the transaxle…Continue
4,442 Pounds of Cadillac Metal Cadmium Plated! - Pick-Up 12th batch Thursday
Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari on Sunday. 3 Replies 0 Likes
Front door handle lights not working
Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Kurt May 20. 3 Replies 0 Likes
My front door handle lights would not go on when I opened the doors. Bulbs were good and had power to them. Was not getting a ground. The door switch was corroded and wasn't making contact when the…Continue
Blog Posts
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2025 Created by Jason Edge.
Powered by
