I had posted this on my Facebook Page but for the non-FBers out there, I thought I would share.

Here's what I look like after a full day of breaking down a parts car! Cheryl came out and snapped a few picture of me in my greasy glory! This is parts car #45, which was making room for parts car #46, another 1964 Sedan de Ville..   You can check out more pictures by Clicking Here.

Views: 367

Reply to This

Replies to This Discussion

I remember when steel was high, and I got 250 for a 64 limo carcass.    Now the last stripped car I brought, I got 40 bucks.

I get $4 / 100 lb.
Was about $12 once.

You could make a pretty awesome couch out of that trunk. Let me know next time you're done with your parts car. I'll buy the rear quarter panels. Mine are Swiss cheese. 

Chris, lip on top edge on this last one was rotted but most of the qtr panels were good. The next parts car seems to have some excellent (are at least good) panels and would be a good donor.  I'll post some info on the next parts car but have to say it is loaded with options from bucket seats, to power vents, cruise, guidematic, am/fm, etc. and will savor this one a bit as it is a great example of these options. In fact I didn't get a key for the trunk but seller said he just opens it from the glove box button when we were negotiating and thought... OK... power trunk!

Sounds like it was loaded with options. Is it a coupe? I know bucket seats on the four doors were pretty rare and built differently if I recall. 

64-6339 Sedan with the stiff uprights on the bucket seats! Check out the Body Plate:

Oh yeah, front and rear seat belts! 

And it runs as is! I can drive it around the yard! First time in a long time I have been able to drive a car up onto and off the car hauler! I've been known to have some fun in the snow with these in the past! LOL I will start pulling some things off in the coming weeks but will keep this one moving and mobile for some time. OK.. spilling all the beans here about the car. I will post some pics, etc. later. I've still go to get the rear end disassembled, doors dismantled and a few more parts put up from last parts car!

That's really cool! Not too often that you find four door cars with buckets. Can't wait to see this one. 

Oh yeah... this car has tilt column, power door locks. Just a few items it doesn't have!  I know the LH 4 way bucket and RH 2 way bucket seat wiring, switches, and switch panels are going to be of keen interest to a few I have had on my Wait List for some time now!

I think the 4 window sedans with buckets is a cool idea. Not sure if I posted it way somewhere, but I have brought in 4 or 5 bucket seat cars in the last 20 years.... all where coupes/convertibles except 1 sedan, so this makes my 2nd sedan bucket seat car. 

RSS

Photos

  • Add Photos
  • View All

Forum

Power Booster Install

Started by Rob Spring in 1963/64 Cadillac Specific Discussion. Last reply by Rob Spring on Tuesday. 9 Replies

Hey! I’ve seen the 63/64 power booster and master cylinder combination has been covered very clearly. I’m in the process of replacing mine. I was hoping someone could give me insight on a specific…Continue

1964 Cadillac Deville Neutral Safety switch and Oil Filter Housing Assembly

Started by Michael Monson in Wanted to Buy. Last reply by Russ Austin on Monday. 3 Replies

Hello, possibly looking a neutral safety switch for a 1964 Deville with the TH-400 and tilt steering.  Also, possibly looking for an oil filter housing assembly for a 1964 429 motor.  Starting to get…Continue

Complete Front End Rebuild

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Mark Mata Apr 3. 1 Reply

I meant to make this a priority over the winter and didn't get that far. I've tried to source all the parts individually, but that is a daunting task. Partly because I don't want to miss any…Continue

A Shout Out to Alan Grist & Some Pictures of His 1964 Series 62 4W Sedan

Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari Apr 2. 2 Replies

As they say, Better Late Than Never!I want to give a shout out to 63/64 Chapter Member Alan Grist, who brought his 64 Series 62 Four Window Sedan, to the 2025 CLC Winter Board Meeting in Chattanooga,…Continue

Blog Posts

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 13 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service