Can someone tell me what color the hood hinges should be? I've seen both silver and gold cadmium plating colors on the cars. Thanks
Comment
Thanks for the suggestion Jason. I'll take a look under my dash to see I can find the correct size.
From the factory the hinges were gold cad, springs were black, and bracket at back and inner fender were black. 9/16" TR/UR stamped hex head bolts were gold cad. Nothing was silver cad under the hood that I have ever seen. The problem is 55+ years, bolts under the hood look like scorched earth. Sometimes on the washers once you remove and flip over they look like nice and new like this...especially if they had a coating of undercoating:
Here's the bolt that came out with that washer... also nice and once you remove the tar/build up a pretty decent bolt.
Of course the best source for bolts is often inside the cabin under the dash... but you don't have all the bolt sizes and styles used under the dash. Most of the engine compartment washers on my 64 CDV came from under dashes. The steering column brackets are a nice source for grade 8 gold cad TR stamped bolts:
Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Kurt on Wednesday. 3 Replies 0 Likes
My front door handle lights would not go on when I opened the doors. Bulbs were good and had power to them. Was not getting a ground. The door switch was corroded and wasn't making contact when the…Continue
Started by Jason Edge in General Discussion. Last reply by Chris Codd on Wednesday. 1 Reply 0 Likes
Started by Jason Edge in 1963/64 Cadillac Specific Discussion on Wednesday. 0 Replies 0 Likes
Here is the 4th picture in my collection of "Promo Pictures" - another 1963 Fleetwood 60 Special. This 60 Special appears to be Nevada Silver, Paint Code 14. …Continue
Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf May 17. 2 Replies 1 Like
I had to replace the heater core in my 63 SDV, so I decided to replace all the dash lights with LED's. and replaced all the vacuum lines. While I was in there, I added a light to the headlight switch…Continue
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
© 2025 Created by Jason Edge.
Powered by
You need to be a member of 63/64 Cadillac Website to add comments!
Join 63/64 Cadillac Website