OPG now shipping right hand mirrors
Comment
-
Comment by Jason Edge on March 20, 2017 at 7:17pm
-
Marty, Glad the measurements helped!
-
Comment by Marty Smith on March 20, 2017 at 1:22pm
-
Jason, thanks for the pics of the measurements for the right mirror placement. I installed one on my 63 Friday night !
-
-
Kevin, Glad it arrived safely. Of the 16 I had preordered for customers on my Wait List, 15 have shipped out and one was installed on my 64 CDV!
-
Comment by Michael Forte on March 5, 2017 at 2:47pm
-
Just like Bob, I ordered mine in late 2015. I pretty much gave up on it, but I got it this week! It's flawless, so I'm happy with the quality.
-
-
When I go to the OPGI site and go to the outside mirrors, with the left side mirror highlighted I see the mirror with the correct control rod. When I click on the RH mirror I then see a mirror without the control rod (see below)...again correct, so I am not sure what others are seeing. Their regular price on the RH mirror is $99.99. I don't do the 99 cent thing and will be selling mine for an even $90, a saving of 1 cent shy of $10. I do have a lot of people on my Wait List for these mirrors and will go down that list first. I expect a % will no longer have the car or no longer need/want a mirror so some will drop off the list. Kevin you are on my Wait List for a RH mirror, but also note you are in Australia. I will have to get a good weight and box size to determine shipping for everyone. For some in the USA the Regional A boxes will be the best, for others it will be by weight and box size, for international customers it will be weight. The one thing about a mirror is you want it packed well! My main thing was I wanted to make sure we had some on hand if & when they did actually produce some. I took it for granted 15 to 20 years ago when McVeys, USA Parts and others were selling them that they would be around. Hopefully they will continue to supply these mirrors, and maybe USA Parts and others will also get in the game. My 64 CDV came with a RH mirror, but the prior owners kid, had pulled on it and broke it off at the base... at least that was the story I was told, and had ordered my replacement through USA Parts Way Back! I will definitely keep an extra around for my 64 CDV!
-
-
Looks very nice from the pictures. I had 2 customers email me today and say they had received theirs and were VERY PLEASED! I was a bit nervous as I completed my order for 16 mirrors earlier in the week and should be receiving them soon. I should be able to knock off at least $10 from OPGI's regular price. Of course I will be going down my Wait List first.
-
Comment by Robert Schles on March 2, 2017 at 9:33pm
-
The mirror arrived today well packed with no blemishes. I am disappointed there is no template. I will be emailing Russ for a copy of his factory original template to help with the installation.
-
-
ps... they completed my order for 16 RH mirrors yesterday and will go down my Wait List first then open up any left overs for sale, saving about $10 off their stated price.
-
-
No control rod or handle on optional RH mirrors.
-
-
Just as an fyi, You can remove the LH mirror and use it as your template. It will be the exact same distance from front and top edge of door, 3 top holes will be the same, as well as the front attaching hole where the large screws goes through. Of course with the RH mirror you do not have an adjustment rod and handle so no modifications needed there.
Photos
Members
Forum
Rear Main Seal & Transmission Pump Seal
Started by Jordan Johansen-Moe in 1963/64 Cadillac Specific Discussion. Last reply by CHRIS CARLSON on Saturday. 1 Reply 0 Likes
Hey everyone, I need to replace my transmission input seal before spring starts, I’ve been losing a lot of fluid post Sunday drive. I figured I’d do the rear main seal service bulletin at the same…Continue
Heater Control Valve
Started by Michael Monson in Wanted to Buy. Last reply by Michael Monson on Thursday. 2 Replies 0 Likes
Looking for a heater control valve 9.795 for my 1964 Deville. ThanksContinue
64 Brakes
Started by Jeff Donaldson in General Discussion. Last reply by Logan Robb Feb 24. 4 Replies 0 Likes
Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue
Burning Rubber
Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Kurt Feb 22. 7 Replies 1 Like
Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light? Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2026 Created by Jason Edge.
Powered by
You need to be a member of 63/64 Cadillac Website to add comments!
Join 63/64 Cadillac Website