Hi everybody,

hope you are healthy in this weird times.

Is there any documentation out there which crayon markings was written on which position by the factory on a 1964 Cadillac? If not, it would be very interesting if everybody who find a marking would post it here.

I'm also interested in having information which markings came on the hoses for the heater and radiator hoses.

I plotted a template and made a replica on my upper radiator hose with the Markal Pro Line HP pen and my ac compressor which came out quite well. I used the same markings, fusickautomotiveproducts sells it, but I'm not sure if it is 100% correct.

Looking forward for your answers... stay healthy.

Views: 241

Attachments:

Reply to This

Replies to This Discussion

Those look really good! I had all of my A/C components rebuilt by a shop in FL. I had them restamp the compressor. Looks just like yours! I have not seen the black decal available anywhere though. I was able to get the Frigidaire one. I got marked hoses from Caddy Daddy.

I ended up taking a lot of the dash out, heater box, evaporator, all of that -- plus I took off the nose, piece by piece, because the engine and trans leak everywhere, plus general deterioration under hood. I noted that the number "94" appeared, in grease pencil, an awful lot. I noted it in the following places: radiator support in battery box area, inside RF fender near where side trim attaches, interior heater box (side that faces firewall), under side of dash pad, top of radio, bottom right of steering column right where bottom of dash covers it, bottom dash cover for steering column. I suspect that this is a job number, used to track items going onto a specific car. I have a couple of 63/4 AM/FM radios here, and at least one of them also has a number written on top of it. Not 94 though. Curiously, the LF fender has a different number, looked like 90. The fender is original and has never been replaced.

Attachments:

Wow, thank you! Do you have any more pictures of the markings?

Yes!

These are the lower dash panel below strg col, and rad support in battery box area, forward facing side.

i found other numbers on both sides of the cowl after I got the fenders off. Not 94, something else. No idea of what they mean.

The radiator support is going to be repainted. I am going to purchase a grease pencil and replace the 94 marking.

Attachments:

I thought aout this number, then I realized that my car is paint code 94, Aquamarine Firemist. I wonder if that is the reason for the number?

But maybe not. I have another 64 radio here with the number 84 written on it. No 84 paint code.

 I can't recall finding any  grease pencil markings  under the hood or anywhere else, but my 6339 is  arctic white, the most common color;  I  need to check out  my parts car 6329 basildon green. I think the numbers on the radios  are unit specific, both matched the last two digits of each car.

You may be onto something there. I checked my VIN and the last two digits are 94.

There were other numbers written on the side of the cowl as well.

Attachments:

RSS

Photos

  • Add Photos
  • View All

Forum

Clock Removal

Started by Jeff Donaldson in General Discussion. Last reply by Jason Edge 12 hours ago. 2 Replies

Hello Everyone,I tried to remove my clock today and couldn't seem to get it to rotate more than a 16th to an 8th of an inch. I followed the instuctions in the manual (counterclockwise approximately…Continue

Dino Diaries - All Jacked Up For Christmas!

Started by Jason Edge in General Discussion yesterday. 0 Replies

I have very limited space in my 3 bay garage with the left and right bay used for storage and work tables, etc leaving the narrow center aisle for my 1964 Coupe de Ville Dino. Six years ago I bought…Continue

Power Brake Booster

Started by Stephen Pechenik in General Discussion. Last reply by Bill Wolf yesterday. 13 Replies

Hello Co-Members,I recently purchased a  low mileage1963 Sedan Deville Park Avenue.  It is extremely solid and runs well.  Neverthelss, it has minor problems that need to be addressed before I can…Continue

Body side molding install help needed

Started by Wayne Morris in 1963/64 Cadillac Specific Discussion. Last reply by Wayne Morris on Saturday. 6 Replies

I am in the process of trying to install body side molding. I have completed installing the two front fender pieces and now trying ti figure out the rest.…Continue

Blog Posts

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service