If you checked out the latest newsletter I included a cool 64 Eldorado promo Picture that I had picked up a few months ago.  Click to enlarge and see this beauty!

Facebook Facebook

Views: 131

Reply to This

Replies to This Discussion

Hey Jason,

Somewhere, packed away in my car files I have an original 8x10 color transparency of that same photo.  

It was part of the 1964 Press Kit that went to magazine journalists (not a lot of those, back in '64) for publication. Judging by the size and quality of the film, it looks like an original, taken by a large-format view camera. 

Back in the '90s, I had an enlargement made and hung it on my Motor Trend office wall.

If I run across it, I'll definitely post it.  Yes, the car is Firemist Saddle. 

This picture is 12" x 18' on an odd all black paper. There was no writing on it and not sure how it was taken or printed but definitely not your stock photo paper, more like a film paper ... but not a transparency of course. It is now in a frame. 

I also have another promo picture that looks like the same car and taken at the same time but it is a smaller 4 1/2" x 9 1/2" size, and at more of an overhead angled shot. It is also has some "For Release" write-up below the picture and will scan it and the picture soon and share. 

the 64 does not have rear fender skirts?

Pretty car and great pictures

There was not fender skirt on the Eldorado. There was a fender skirt on the other body styles. 

Yep. I love the no-skirt look of the '64 Eldo.  Really gives a sportier appearance to the car. 

I always make the point to anyone who comments on my '64 Eldo that the no-skirt styling was Eldo-only, and 1964-only.  I have not met a single person (even other "Cadillac guys") who knew that detail.  

Of course, members of this site do, but it's fun trivia to tell to others.

RSS

Photos

  • Add Photos
  • View All

Forum

Replacement Front Crankshaft Seal - 1964 Eldorado (429ci)

Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Marty Smith 4 hours ago. 1 Reply

My mechanic is having difficulty sourcing a front crankshaft seal.  Can anyone recommend a replacement front crankshaft seal, and where to purchase?  Amazon has a few that I think(?) are replacements…Continue

Tags: Seal, Crankshaft, Front

Logans Intake Project, 1964 Fleetwood, Progress Report #2

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin yesterday. 1 Reply

Hello all!Just a short update this evening!I wrestled with the exhaust manifold studs and ultimately chickened out on replacing all 4 of the studs. I only replaced the stud that I spun the threads…Continue

Rear main seal

Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson yesterday. 5 Replies

Hi Everyone can somebody tell me where I can get a reliable rear main seal?I have done the end cap modification and replaced the seal twice,after around 500 miles it starts to leak again,not as bad…Continue

Scout Shows up in the Garage with "Man Bun" to Work on Cadillac!

Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari on Sunday. 1 Reply

Cheryl brought my 4 1/2 month old boy Scout out to the garage in a man-bun to help work on the Cadillac. Sometimes you just have to roll with it! (I am scared to see who she will "dress up" Bandit…Continue

Blog Posts

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service