Lower Front Grille 64 Fleetwood
As I prepare for the CLC Fall Festival next weekend, I find myself finishing up everything on my list that I wanted to get done ACCEPT the lower front grille.
Jason put together a SUPERB front grill for me several months ago and I have been afraid to tackle that job.
I have the whole weekend to get the lower grille out and put back in.
How hard of a job will it be? Looking for any tips and tricks, thank you!
Logan
Replies to This Discussion
-
Permalink Reply by Jason Edge on
-
I would use plenty of PB Blaster getting the perimeter fasteners off the old one, use a bright headlamp, and just take your time.
-
Permalink Reply by Logan Robb on
-
Does the bumper need to come off? It looks like everything should come right out of there!
-
-
Shouldn't need to come off. I remove the entire assembly when parting a car. At works you might loose the upper bumper outer to inner fender "hanger" bracket from bottom and loosen the 4 large bumper bracket to frame bolts/nuts to the bumper assembly drop a bit but I don't think you need to drop the entire bumper. Someone may have experience replacing in place and can chime in and I will look at my 64 again later this evening.
Photos
Members
Forum
Clock Removal
Started by Jeff Donaldson in General Discussion. Last reply by Jason Edge 15 hours ago. 5 Replies 0 Likes
Hello Everyone,I tried to remove my clock today and couldn't seem to get it to rotate more than a 16th to an 8th of an inch. I followed the instuctions in the manual (counterclockwise approximately…Continue
Happy Holidays from Classic Cadillac Parts
Started by Jason Edge in For Sale yesterday. 0 Replies 0 Likes
I will be out of town Dec 25-29 so anyone that needs something or wants a…Continue
Dino Diaries - All Jacked Up For Christmas!
Started by Jason Edge in General Discussion on Monday. 0 Replies 0 Likes
I have very limited space in my 3 bay garage with the left and right bay used for storage and work tables, etc leaving the narrow center aisle for my 1964 Coupe de Ville Dino. Six years ago I bought…Continue
Power Brake Booster
Started by Stephen Pechenik in General Discussion. Last reply by Bill Wolf on Monday. 13 Replies 0 Likes
Hello Co-Members,I recently purchased a low mileage1963 Sedan Deville Park Avenue. It is extremely solid and runs well. Neverthelss, it has minor problems that need to be addressed before I can…Continue
Blog Posts
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Vintage Air AC
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
accumulator dryer
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Events
Videos
© 2024 Created by Jason Edge.
Powered by
