Greetings Everyone.  I read a discussion thread about "radiator and related", covering coolant overflow.  Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac?  Is there if a particular universal reservoir that can be fitted and attached to the radiator support housing or the passenger inner fender?  Then insert the overflow tube into the reservoir?   Thoughts / suggestions? 

I am monitoring coolant overflow and / or possible mixing with the oil.  If an overflow reservoir doesn't clear up the puddle on the garage floor, I will investigate a possible head gasket issue.  

Facebook Facebook

Views: 63

Reply to This

Replies to This Discussion

Several folks run the generic square coolant overflow tank. I see this in 99% of the uses. Amazon.com: Dorman 54002 Engine Coolant Recovery Kit Universal Fit ...

I mount mine on the RF inner fender right behind the radiator core support. 

Thanks Russ.  I'll check out the one you recommend. 

Hi Michael,

    I have a 64 Series 62 and albeit it never had an overflow for coolant, I decided to install one for safe measure.  I found one that fit perfectly between the grill and the metal frame.  Only had to drill one hole (the other was there) and it works perfectly.  My email is ddibari56@gmail.com and can give you a picture and details.

Dennis DiBari, Cottekill NY

Michael,

I sent you an email with the information you requested.

Dennis DiBari

I saw somebody do this a few years back. Thought it was a clever solution

Hi Mike,

     Any luck with the coolant overflow tank we talked about for your Caddy?

Dennis DiBari

RSS

Photos

  • Add Photos
  • View All

Forum

Logans Intake Project, 1964 Fleetwood, Progress Report #3

Started by Logan Robb in 1963/64 Cadillac Specific Discussion 2 hours ago. 0 Replies

Not much of an Update and Questions: I was inspecting the top end and had removed the air cleaner in preparation to replace the intake. It was dirty so decided it needed a wipe down. My goof was…Continue

Replacement Front Crankshaft Seal - 1964 Eldorado (429ci)

Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 9 hours ago. 2 Replies

My mechanic is having difficulty sourcing a front crankshaft seal.  Can anyone recommend a replacement front crankshaft seal, and where to purchase?  Amazon has a few that I think(?) are replacements…Continue

Tags: Seal, Crankshaft, Front

Original Rim Color

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Michael Stinson 18 hours ago. 3 Replies

When I get some new shoes for my 64 Fleetwood, I'd like to recondition the rims. I'd thought of getting them powder coated, and still plan to eventually, but the $700 quote I received shunted that…Continue

Logans Intake Project, 1964 Fleetwood, Progress Report #2

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Monday. 1 Reply

Hello all!Just a short update this evening!I wrestled with the exhaust manifold studs and ultimately chickened out on replacing all 4 of the studs. I only replaced the stud that I spun the threads…Continue

Blog Posts

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service