Excellent Set of 1964 to 1967 429 Heads, Cleaned, Magnafluxed, Ready to Rebuild - $200
I've got a good selection of cylinder heads and have started taking them in and having them cleaned and magnafluxed to check for cracks, and to make sure they are right before they go out the door to customers. The price will be $200 for a set of $100 per head. These are RIGHT AND READY for a valve job with now worries of a cracked head. If you are looking for a nice set email me at jasonedge@nc.rr.com with ship to address.
Note these are correct for all 1964 to 1967 429's except 1966 and 1967 California Car with AIR.
Replies to This Discussion
-
Permalink Reply by Jason Edge on
-
2 more sets of excellent heads picked up from machine shop today ready to go. I'll put 2 or 3 sets of 1963 heads in to be cleaned and magnafluxed in the next few days. Price will be the same.
Photos
Members
Forum
Windshield washer pump inoperative
Started by Wayne Morris in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Saturday. 14 Replies 0 Likes
I have spent a few hours trying to get pump to pump fluid. The lines are all clear, The pump Is working as it should when the washer button is pushed. I have a spare wiper motor assembly which I have…Continue
63 vs 64 Hood V Size Difference
Started by Jason Edge in 1963/64 Cadillac Specific Discussion on Saturday. 0 Replies 0 Likes
The 64 hood V is considerably bigger than the 63 hood V, and one of the many things I have not done in dealing with these cars on the last 3 decades was to do a direct comparison. Someone asked about…Continue
Radio Models 1963 to 1968
Started by Jason Edge in 1963/64 Cadillac Specific Discussion on Friday. 0 Replies 0 Likes
I sometimes get asked what radios were used in 1963 and 1964 or verification of a radio model number, so I scanned the radio listing from a 1968 Master Parts Book that covers 63 to 68 which covers…Continue
64: BULB FINALLY INSTALLED BUT CLOCK, GAUGE LIGHT AND RADIO DO NOT ILLUMINATE
Started by Norman Silverman in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Thursday. 14 Replies 0 Likes
HELLO ALLSo, after 4 hours work to remove and replace the bulb behind the "defrost" on the HVAC panel, the same bulbs that started me doing this are still out-even though I replaced all three of…Continue
Blog Posts
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Vintage Air AC
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Events
© 2025 Created by Jason Edge.
Powered by
