Steve Tischer's Discussions (14)

Discussions Replied To (13) Replies Latest Activity

"The PCV was spliced into that hose and tucked under the manifold  the hose going und…"

Steve Tischer replied Sep 12 to timing to far advanced

28 Sep 12
Reply by Tony and Ginny 429

"What one would be a 4 door hard top  62 Sedan ? "

Steve Tischer replied Sep 12 to timing to far advanced

28 Sep 12
Reply by Tony and Ginny 429

" I am getting it in shape to sell I am nearing retirement and going to be moving  an…"

Steve Tischer replied Sep 12 to timing to far advanced

28 Sep 12
Reply by Tony and Ginny 429

"OK I found it  was a cracked hose going to the PCV valve and a bad PCV plugged the p…"

Steve Tischer replied Sep 12 to timing to far advanced

28 Sep 12
Reply by Tony and Ginny 429

"here they are "

Steve Tischer replied Sep 11 to timing to far advanced

28 Sep 12
Reply by Tony and Ginny 429

" Thanks I will do that thank you very much for responding "

Steve Tischer replied Sep 11 to timing to far advanced

28 Sep 12
Reply by Tony and Ginny 429

"OK  I am back at it this thing is just Idling to fast  I got totally fed up with it…"

Steve Tischer replied Sep 10 to timing to far advanced

28 Sep 12
Reply by Tony and Ginny 429

"not sure  no name on it  it has 4 doors cloth  seats  and that transmission pretty s…"

Steve Tischer replied Mar 9, 2018 to timing to far advanced

28 Sep 12
Reply by Tony and Ginny 429

"OK thnk I got the reply and post down  sucks being newbee  "

Steve Tischer replied Mar 8, 2018 to timing to far advanced

28 Sep 12
Reply by Tony and Ginny 429

"I looked at it better today and the vac adv is hitting a coolant sensor not the valv…"

Steve Tischer replied Mar 8, 2018 to timing to far advanced

28 Sep 12
Reply by Tony and Ginny 429

RSS

Photos

  • Add Photos
  • View All

Forum

Got a new toy

Started by Russ Austin in General Discussion 3 minutes ago. 0 Replies

Continue

Hydra-Matic with some problems

Started by Robert Tor in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin 6 minutes ago. 11 Replies

today was a black saturday: my 1964 Caddy "baby" only drives in the first gear and reverse. so I drained the oil (6 liters - not drained the converter) , pulled off the pan and the filter. just dirt…Continue

I need to buy rim for tire Los Angeles ca

Started by Charles in Wanted to Buy. Last reply by Ian Osborne 4 hours ago. 1 Reply

in need or rim for tire Cadillac Fleetwood 64 any one known why i can buy in Los Angeles ca ..hi..thanks 310 309 0332Continue

Rear main Follow up replacement and repair,,

Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 5 hours ago. 18 Replies

Well, got it all together,, Jason, i was looking in the wrong chapter in the manual on the starter,, got that figured out.  everything hooked back upGot it put back together, started up, and oil…Continue

Blog Posts

driveshaft help

Posted by wayne weaver on October 9, 2019 at 4:41pm 1 Comment

can anyone help me with a driveshaft ? I have a 1963 Cadillac 62 series 4dr with the hydro-matic trans. I need the male splined shaft on the front of the rear driveshaft section. the piece with the nut attached by clip.id be willing to buy a shaft if its not horribly priced.

Dash removal

Posted by Jake Mickley on October 9, 2019 at 12:06am 9 Comments

Hello everyone,

On a 63 CDV, if a guy wanted to remove the entire dash to get all the metal painted, and do some other things behind there, how would he go about doing that?  I checked here and the shop manual, but can't find a complete guide.

As always, and help or direction is appreciated.  Thanks!

--Jake

Introducing myself

Posted by Gary Marchand on October 7, 2019 at 9:32pm 8 Comments

Thanks for letting me join the club.  Picked up this ‘64 Coupe Deville a few months ago out of Beverly MA, the car has few stickers on it from various Cadillac clubs, didn’t know if anyone might recognize it from it’s “Glory days.” Everything seems pretty healthy except for the body and some very Mickey Mouse repairs, was wondering if anyone had any leads on…

Continue

Carter AFB carburetor question

Posted by Ray Schick on October 7, 2019 at 8:29pm 8 Comments

3655S carb, and a 3656S carb .I know the difference is one is for A/C and the other in for a non A/C car . Now the question is : can I use the carb bowl from the A/C car on the non A/C car ? They look the same set up next to each other

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service