All, a while ago I purchased a set of 4 clocks from Jason that he had on the shelf.  I have had some experience in the past repairing clocks, and I was able to get 3 of those four operational.  One I needed for my car, but I have two more that work and keep good time.  Here is my offer, if you would like one for your vehicle contact me at pat.westphal@gmail.com, and we can do an exchange.  You send me your clock - one that is simply not working (you know not in pieces) and I'll send you one of these clocks that work.  Then I will try to fix the clock you sent me and if successful offer that one for someone else.  I know that an operating clock is not a big deal in the overall scheme of what we are all doing on our vehicles but it is kind of cool to have one that works.  Happy motoring.     

Views: 194

Reply to This

Replies to This Discussion

This is a great deal. Anyone here need a clock that works? Pat is giving you one for free if you send a complete core. You can't beat that deal with a stick!!

Hi Patrick I sent  my clock to you today  let me know when you get it

RSS

Photos

  • Add Photos
  • View All

Forum

Wanted - running 429

Started by Joel A Campos in Wanted to Buy. Last reply by Russ Austin yesterday. 4 Replies

Hi all,Looking for a running 429 doesn't have to be perfect but must have had the THM trans behind it.Thanks,JoelContinue

1963/64 Cadillac Chapter November 2025 Newsletter Posted

Started by Jason Edge in Newsletters. Last reply by Dennis P. DiBari yesterday. 1 Reply

I have just completed and posted the November 2025, 1963/64 Cadillac Chapter Newsletter to our…Continue

1963/64 Cadillac Starting - Cranking System Basics

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Monday. 16 Replies

I have had this info written up for some time and meant to post so here it is. I will link to this from our Help Page:1963/64 Cadillac Starting - Cranking System Basics Wiring You have a positive…Continue

Happy Birthday to Chapter Member Ted Mandalakis

Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari on Sunday. 1 Reply

I am putting the final touches on the next newsletter which feature Ted Mandalakis and his splendid 1964 de Ville Convertible and just have to share this picture of Ted and the Caddy on his birthday!…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service