I posted this on my Facebook Page but thought I would share here since it is car related:
Tags:
It's kind of sad to see high performance built cars that are only for show. Might as well have saved some money and built a #'s matching car to factory spec if it's not getting driven. It would probably be more valuable anyways, but to each his/her own. That was one cool looking Camaro you had there, Jason.
Well there are Show Tires and There are Go Tires. I had Go Tires! The best looking car I saw at the CCAF was a 69 Camaro with balanced tires that were not razor thin, but still had the taller rims. I could definitely see myself in something like this! The goal at the 1/4 or 1/8 mile track is to get to end the fastest, which means you want you meats grabbing the asphalt. One of the funniest street drag races I had was one that look like a scene from the old James Dean movie. A guy challenged me from another rural county and we showed up in the middle of nowhere on a paved street in the middle of farmland. There were dozens of kids that showed up from the local high school and again looked like a scene from those old rock N roll racing moving! They had the road marked off 1/4 mile and new the deal. That was the cool part. The funny part is that while I ran a moderate 3.93 posi gear, this guy shows up with his "rich kid car on a rich kid trailer". (yeah, even had trailer queens back then!). He unloaded and talked to him and while I was a poor kid paying my way through NC State working at Sears, this guys dad had spent tons on his sons car. One of the main reasons it was on the trailer was also because he was running a 5.11 gear which is extremely impractical for regular road use. The 3.93 would mean I was pulling some moderate rpms on the highway, but a 5.11 gear would be revving like crazy. OK... so back to tires. This guy pulls off the trailer, doesn't have a clue about air pressure or heating up the tires, and just blocks his car at the line. I of course drop my pressure to about 12 psi, and start heating up the tires. I've also got a healthy stall converter that lets much punch the RPM way up before blasting off. The guy standing in them middle of the road 1/4 mile drops his arms and I leave the other guy sitting there with his full air pressure, 5.11 gear and crazy powerful car just fish tailing. I had a 35 lb front end and it invariably pulled off the ground about a foot and I was gone! I had jumped him so hard off the line I had him 2/3's down the track but he was gaining with all that power. I think I would have beat him... in fact I know I would have, but as we were nearing the finish line water and steam suddenly started pouring out under my cowl hood. Be fore I knew it the engine had overheated and later found out I cracked the both heads. I couldn't let up even with the steam coming out of the hood. He took me by maybe a car length, but enjoyed every minute of it, especially knowing I left someone with a much lower gear and exponentially more money in the car, sitting at the line. So there are show tires and there are Go Tires. I had GO Tires!
Mine and Cheryl's first date was at the drag strip. Beat a 69 Camaro pretty handily, won the trophy got the girl! LOL Still have that trophy from that night.... and the girl too!
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Phillip Hill 3 hours ago. 4 Replies 0 Likes
Hi Everyone can somebody tell me where I can get a reliable rear main seal?I have done the end cap modification and replaced the seal twice,after around 500 miles it starts to leak again,not as bad…Continue
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb 20 hours ago. 3 Replies 0 Likes
I plan to do a full write up when this project is complete, however, I figured someone may get some benefit of seeing the progressions I make and the steps I took to get there. This also is a good…Continue
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Frank Murch on Thursday. 2 Replies 0 Likes
I have a 1963 Cadillac differential with 80K on it. Found a limited slip a while back, and I do not think I will ever used the original diff. In is in carlsbad California 92009. Let me know if you…Continue
Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Thursday. 3 Replies 0 Likes
The schematics are from the repair manual and show a LIGHT BLUE wire coming from the headlight switch to the dimmer switch. From the dimmer switch to the low beams on a TAN wire and to the high beams…Continue
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
© 2025 Created by Jason Edge.
Powered by