What should end play be on the distributor shaft. Mine already has a fairly thick shim in there, but the play is still around 0.053"

Could this cause erractic ignition? It stumbled and backfire when trying to run

On a 1963 390"

https://youtube.com/shorts/vGfOEdu43I4?si=ZLMdPgRDTKmmif3C

Henrik Sonne 

Views: 45

Reply to This

Replies to This Discussion

There is alot of play in the distribs, but they work fine. 

Thanks.

With the gears cut at a angle, does mean it puls the shaft down when running?

I would assume so.

That amount of play is normal ,  if you have side to  side play @ the breaker point cam because of a worn upper  bushing and shaft that would change the dwell, The point gap when its running but i doubt that's your problem. I would test your condenser with a condenser tester or replace it with a new condenser. if you have access to a working distributor machine preferably with a condenser tester meter , there are a series of tests to evaluate the overall condition of the distributor. I test all condensers even new ones before i install them. I would not purchase new old stock  condensers on line because they are 30& 40 & 50 years old and wont pass the leakage test 50% will fail. I perform distributor repair and testing & test them on a Sun 504 distributor machine.    Check your accelerator pump shot on the carburetor if that doesn't work  that would cause it to stumble & back fire,  also check for  vacuum leaks.

0

RSS

Photos

  • Add Photos
  • View All

Forum

Too Cold to Do Much with Dino Right Now

Started by Jason Edge in General Discussion 13 hours ago. 0 Replies

North Carolina can be pleasant in the winter, with temps mild (60's/70's in the day and 40's and 50's at night); however, yesterday when I got up it was 20, and the has been in the mid 40's, Today it…Continue

What To Do With Those Damn Coil Springs?!

Started by Jason Edge in General Discussion 17 hours ago. 0 Replies

Coil Springs is one part I generally do not sale (who wants a tired used coil spring), but it is also one of those items I just can't let go up. I have painted them, stuck lights in them, put them…Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 1 Reply

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

64 cadillac deville convertible interior

Started by Larry Rees in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Tuesday. 1 Reply

Hello everyone. I am trying to sort out a interior order that came to me with the wrong diamond pattern and no buttons. They are going to fix it but I would like to include some pictures of the…Continue

Blog Posts

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service