It’s been over three years since I had my (then just purchased) car towed for the first time and it has been a nightmare ever since.
But I can finally say: it is back home and I did my first 2h drive around the neighborhood today, since humidity was down for a change.

While I have great products to clean and maintain my leather I was wondering what you all are using for the rest of the interior (e.g. the dash) and the exterior. I don’t want to go at it with anything to harsh.

Thanks and looking forward to driving finally.
Daniela

Views: 84

Reply to This

Replies to This Discussion

Daniela,  That is absolutely fantastic! You have been through so much and glad you hung in there so you can enjoy your 63 Eldorado. Here is a throwback picture of you in that Eldorado from 2021! We will definitely have to do a full newsletter cover feature now that you have it on the road.

Hi Jason,

it’s been a ride.  lol Not sure if it is worth a cover feature but as soon as it’s cleaned up and I find a nice locationfor pictures we can do that. 

btw - this is a pic frontage day I picked the car up from the last mechanic. Some street just the other side

Great picture!

Daniela,

     This is really great news and congratulations!  Enjoy the ride - that's the best part.

Dennis DiBari

Thank you! 

As far as interior & exterior cleaning products you will get a variety of answers.

Personally, for exterior waxes I like Meguiar's Ultimate Liquid wax. 

If  your car paint has road grime, oxidation, etc, and needs a good polishing wax I use Meguiar's Ultimate Compound first, then the Ultimate wax.

For interior vinyl, rubber and plastic I like

Mequiar's Ultimate Protectant

While you said you have leather products I will throw out that I like the Lexol products:

RSS

Photos

  • Add Photos
  • View All

Forum

Seam Sealer Locations?

Started by Donald Swenson in 1963/64 Cadillac Specific Discussion. Last reply by Donald Swenson yesterday. 2 Replies

Hello,Just wondering if anyone has photos to where I need to apply new SEM seam sealer on the front of the fenders to the inner top Cowl area and the corners of the Radiator support?I am in the…Continue

Rear Defroster

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb yesterday. 2 Replies

I was watching a YouTube video (I'll attach it below) of a 1964 Fleetwood 60 Special revival and I noticed it was equipped with a rear defrost option (as well as nearly every other option for 1964…Continue

Share your Photos!

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb yesterday. 8 Replies

The wintertime blues are hitting hard as 3-6" of snow is forecasted for later this week. Share your favorite photos of your 63 or 64 Cadillacs! Spring/Summer/Fall cant get here soon enough!Thanks for…Continue

Techniques for replacing pinion seal on differential

Started by allen dilley in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Friday. 2 Replies

My 63 Park Avenue has a leak at the differential.  My accomlished, experienced, and reliable mechanic has never replaced a seal of this type. I have a pinion seal and differential gasket.  I also…Continue

Tags: Replacement, Seal, Pinion

Blog Posts

'63 Tailfin Tales

Posted by Mark Mata on January 14, 2025 at 12:06am 1 Comment

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service