heater hose
I am replacing my heater hoses and was wondering if anyone has found a replacement for the 1479723. Its the 3/4" hose that goes from the heater core to the pipe running under the intake. Thanks
Replies to This Discussion
-
Permalink Reply by Larry Rees on
-
This is for a 64 Deville
-
-
I have tried to use a hunk of 3/4" off the roll but it starts to kink when bent in the small area. The hose that I removed was molded. It had the mold close enough to work but no part number left on it. The original part number 1479673 is no long any good but was looking for a conversion to a newer part number of a hose that is close enough to work without kinking.
-
-
Thanks good advice
-
Permalink Reply by Jason Edge on
-
Anyone have a good replacment # for Larry? I have replacement #'s for all the other hoses but would like to have a couple for this one. So, if you have a replacement # give us a shout. (Yes, I know we can all march to the auto store and have some one match one up, but we are looking for someone that has made that trek and id'ed a good replacement hose.)
-
Permalink Reply by David Thomas on
-
I us NAPA .75 inch 90 degree hose from the heater core to under manifold pipe. I think the part number is 9816. I trimmed the excess to fit. I use their 90 dgree .625 inch hose for the thermostat nipple to valve and from the valve to the heater core. Also trimmed to fit.
-
-
thanks
Photos
Members
Forum
Rare Society of Automotive Engineers "The 1964 Cadillac Comfort Control" 1964 publication
Started by Jeff Tepper in 1963/64 Cadillac Specific Discussion yesterday. 0 Replies 0 Likes
HI all,I found this publication on Ebay last year and bought it immediately. No one has told me that they have ever seen or heard of this publication.It was put out by the Society of Automotive…Continue
Check out Marlina & David Stone's 1964 Coupe de Ville in January Self-Starter
Started by Jason Edge in Chapter Discussion. Last reply by Mack on Sunday. 2 Replies 0 Likes
We have another 63/64 Chapter Member spotlighted in the January 2025 Self-Starter. In the "Letters to the Editor" section on page 6, you will see the picture below of Marlina & David Stone's…Continue
Christmas 2024 with the 1964 Fleetwood 60 Special
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge Jan 21. 3 Replies 0 Likes
A little late posting, but figured some may enjoy seeing it post holiday to keep the winter blues away!My wife, Annie, and I had a great time with the Fleetwood before the salt hit the roads here in…Continue
Anyone Ever Hear of or Use Gary's Steering Wheels
Started by Jason Edge in Restoration Discussion. Last reply by Chris Codd Jan 20. 3 Replies 0 Likes
Scanning thru the Feb issues of Hemmings I found a listing for Gary's Steering Wheels. I didn't think I had heard of them but looked on our …Continue
Blog Posts
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Vintage Air AC
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Events
-
February 16, 2024 - 63/64 Cadillac Chapter Zoom Meet-Up
February 16, 2025 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes
Videos
© 2025 Created by Jason Edge.
Powered by
