My '64 De Ville won't start
Gentlemen,
I've been having a problem recently with my car stalling at a stop light. It happened three times. The first two was just a quick restart and the engine fired right up. The third time, I had difficulty starting her. I finally go her started and limped her home. I suspect a failing fuel pump and replace it.
The first day, the car ran great. The next day, she stalled out again when decelerating and at a stop light. I got her started and home.
This morning, I started her cold and she started right up. Drove her to the donut shop get together and then she wouldn't start initially. Got her started and home. At home I turned her off, the tried to restart her. No luck. She just cranks over. There is spark at the coil and at plug 1 (I didn't test the other plugs.). There is also fuel with pressure in the fuel filter bowl. See pick.
Here are YouTube links with the videos of attempting to start the Car, and one showing fuel shooting into the intake ports. Any thoughts what the problem might be, and running? Perhaps a float problem???
Thanks for all your input!!!
- Attachments:
-
-
IMG_5910.HEIC, 1.7 MB
-
Replies to This Discussion
-
Permalink Reply by Michael Vogler on
-
Thanks for all of your advice. Merry Christmas to you and Ginny.
Mike
-
Permalink Reply by Jason Edge on
-
Cool video! At least now you know the culprit! Good to see you on our Zoom Chapter Chapter tonight.
-
-
Thanks, Jason.
Sorry I couldn't stay for the whole thing. I had a dinner date with my wife.
Merry Christmas and Thanks again.
Mike
-
Permalink Reply by Kurt on
-
Looks very similar to the hotwire pigtail I made. Keep that in your glove box. It'll get you home if you accidently lose your keys (or lock them in the trunk : )
https://6364cadillac.ning.com/forum/topics/1962-390-won-t-ignite-at...
-
-
New ignition switch and I’m back on the road! Thank you all for your advice.
https://youtube.com/shorts/jwHuP2RhO8Y?si=R8-jQ6-0bVT8cTBf
-
-
That is fantastic. Always a good feeling to figure out and fix a problem like this! Well done!
- ‹ Previous
- 1
- 2
- Next ›
Members
Forum
Adapt, Improvise and Move an Cadillac Engine!
Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari yesterday. 1 Reply 0 Likes
Just wanted to pop in and say hello and give a quick update on a couple of things and share a garage thing I thought you might get a kick out of. First, my arm is out of the brace as of last Monday…Continue
Front Fender Skirt Backing Bracket Access – Question + Cad Plate Love
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Tuesday. 1 Reply 0 Likes
Hello all,I’m in the middle of swapping out the front fender skirt backing brackets on my ’64 Fleetwood and had a quick question for the group. I picked up a beautiful fresh set of cadmium plated…Continue
Power Booster Install
Started by Rob Spring in 1963/64 Cadillac Specific Discussion. Last reply by Rob Spring Apr 8. 9 Replies 0 Likes
Hey! I’ve seen the 63/64 power booster and master cylinder combination has been covered very clearly. I’m in the process of replacing mine. I was hoping someone could give me insight on a specific…Continue
1964 Cadillac Deville Neutral Safety switch and Oil Filter Housing Assembly
Started by Michael Monson in Wanted to Buy. Last reply by Russ Austin Apr 7. 3 Replies 1 Like
Hello, possibly looking a neutral safety switch for a 1964 Deville with the TH-400 and tilt steering. Also, possibly looking for an oil filter housing assembly for a 1964 429 motor. Starting to get…Continue
Blog Posts
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 13 Comments 0 Likes
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2025 Created by Jason Edge.
Powered by
