Please post a pic of door panel
Replies to This Discussion
-
Permalink Reply by 3ft7bqmb7dryo on
-
Phil, do you have a series 62? or a series 63
-
Permalink Reply by Phil Jakubowski on
-
deville convertible
-
Permalink Reply by Jason Edge on
-
Phil, Here are a couple of pictures of my 64 CDV with the door panels installed. These will be the same door panel as your 64-6267 DeVille Convertible. Only difference between the door is your side glass and vent window glass and frame are shorter...panels are the same. Note that I have power vent windows, so you would have the grooved stud with crank handle in top front painted metal plate if you have manual vent windows. Click image then click "View Full Size" to enlarge:
-
-
Do not forget to put a liner between the panel and door. I only know about 61-62 Cadillac doors but if they are the same the door liner goes into a long slot at bottom of door. The water will run down the liner and be funneled back inside the door and out the weep holes in bottom of door. It keep the door panel dry. If not you will have wrapped door panels.
-
-
This is how I did my car. See the rain drops. This is what happen when it rains. My car was all together except for the inside door panel.
- Attachments:
-
-
image.jpeg, 859 KB
-
-
-
It is a strong oil type paper. I have never sourced any and use the thick mil plastic as Dave did. Seems to keep the water off the door panel and out of the car which is it's purpose.
-
-
Joining in on the door panel water shield paper. I have not ordered any but plan to try it RUBBER THE RIGHT WAY has a product listed for that purpose in their catalog.
-
-
Gene, Maybe you can post a picture once you get it tacked up to the door. thanks, Jason.
-
-
Jason, Maybe in a year or two. LOL
-
-
Thank you everyone for the info. I will post pics when completed
-
-
Can someone please post a photo of the Interor door without the door panel. Just the naked steel inside door. I want to see if the 63-64 door has a long slot for water barrier to slip in to.
-
Members
Forum
Dino Radiator Leak - Time to Recore!
Started by Jason Edge in General Discussion. Last reply by Bill Wolf on Friday. 36 Replies 0 Likes
I had brought up the topic of radiator leaks as a discussion topic for our Chapter Zoom meet-up this past Sunday and thought I would share on our website for everyone and probably do a more formal…Continue
front seat crest
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Friday. 2 Replies 0 Likes
Original seats had a crest on the center arm rest. Does anybody know where I could embose a crest in new material for a reupolstry?Continue
64 Replacing dash illumination lights-how much has to come out to get to all of them?
Started by Norman Silverman in General Discussion. Last reply by Norman Silverman on Thursday. 11 Replies 0 Likes
Hello AllI have taken off my dash top and started replacing dash bulbs with LED's for greater visibility. Some questions:1) To replace the Gauge bulb it looks like easier access is had by removing…Continue
Correct whitewalls
Started by Richard Stanley in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Wednesday. 3 Replies 0 Likes
I just replaced my tires from Diamondback (I had bad results in the past from Coker). It was the second time, due to the age of the tires. About 18 years ago Diamondback made custom whitewalls…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
Videos
© 2025 Created by Jason Edge.
Powered by
